Abstract:Extensive attentions have been paid to develop steam reforming of bio-oil, which was considered as one of the sustainable technologies for producing eco-friendly next-generation energy sources, such as syngas and hydrogen. In this work, the novel catalysts consisted of CoAl2O4 spinel and Co-phyllosilicate are facilely manufactured from xCo/Sepiolite (xCo/SEP) precursors and their catalytic performance has been studied in steam reforming of simulated bio-oil (SRSB). The effects of Co content on the microstructures and physicochemical properties of catalysts are analyzed by various characterizations such as N2 adsorption-desorption, XRD, FTIR, H2-TPR, HRTEM and XPS. The results reveal that the CoAl2O4 phases in these catalysts are evolved gradually from Co-lean nonstoichiometric Co1−xAl2O4−x to Co-rich CoAl2O4 structure with increasing Co loading, subsequently accompanying with the formation Co-phyllosilicate species (CPS) when the Co content exceeds 10 wt%. Among them, calcined 15Co/SEP sample with optimal configuration of Co-Al spinel and CPS leads to its reduced-counterpart possesses fine Co metal nanoparticles, abundant defective Co-Al-spinel and metal-support interface sites. It therefore presents the highest carbon conversion (95.7%) and H2 yield (68.8%) in activity experiment and a slight deactivation in 50 h of stability test during SRSB. The analyses of TG-DSC, XRD and HRTEM are conducted on used catalysts and discover xCo/SEP-derived catalysts exhibit promising coke resistance and metal sintering is the major issue for catalyst deactivation, which mainly caused by particle migration and coalescence mechanism due to the further reduction of CPS.

Effect of Coal Ash on the Steam Reforming of Simulated Bio-oil for Hydrogen Production over Ni/γ-Al2O3

Catalytic steam reforming of bio-oil model compounds for hydrogen production over coal ash supported Ni catalyst

Steam Reforming of Acetic Acid over Coal Ash Supported Fe and Ni Catalysts

Effective Hydrogen Production from Partial Oxidation of Propane over Composite Ni/Al2O3-SiC Catalyst

Enhanced Hydrogen Production from Steam Reforming of Vegetable Oil over Bimodal ZrO2-SiO2 Supported Ni Catalyst

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Enhancement of hydrogen-rich gas production by acetic acid steam reforming: characterization of Ni–Co modified biochar-based catalysts

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

Catalytic Steam Reforming of Bio-Oil-Derived Acetic Acid over CeO 2 -ZnO Supported Ni Nanoparticle Catalysts

Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

Steam Reforming of Model Bio-Oil Aqueous Fraction Using Ni-(Cu, Co, Cr)/SBA-15 Catalysts

Hydrogen Production Via Steam Reforming of Acetic Acid over Biochar-Supported Nickel Catalysts

Hydrogen Production Via Catalytic Reforming of the Bio-Oil Model Compounds: Acetic Acid, Phenol and Hydroxyacetone

Hydrogen-rich syngas production via steam reforming of acetic acid as bio-oil model compound: Effect of CaO addition to NiAl 2 O 4 catalyst

Research of the combined reforming of bio‐oil model compound for hydrogen production

Catalysts for Steam Reforming of Bio-oil: A Review

Influence of CoAl2O4 spinel and Co-phyllosilicate structures derived from Co/sepiolite catalysts on steam reforming of bio-oil for hydrogen production

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Experimental and Subsequent Mechanism Research on the Steam Reforming of Ethanol over A Ni/Ceo2 Catalyst

H2 produced by catalytic reforming of acetic acid over Ni/char catalyst recycled from the biochar adsorption purification of simulated Ni electroplating wastewater

Sustainable carbon-based nickel catalysts for the steam reforming of model compounds of pyrolysis liquids