Abstract:H2 production can be used as a clean and renewable energy source for various applications, including fuel cells, internal combustion engines, and chemical production. Using nickel-based catalysts for steam reforming biomass tar presents challenges related to catalyst deactivation, poisoning, heterogeneous composition, high process temperatures, and gas impurities. To overcome these challenges, adopting a nickel-based catalyst with selected oxide support and MgO and CaO promoter is a promising approach for improving the efficiency and sustainability of steam reforming for hydrogen production. The majority of studies conducted to date have focused on the steam reforming of particular tar compounds, most commonly benzene, phenol, toluene, or naphthalene, over a range of support catalysts. However, the actual biomass tar composition is complex, and each component impacts how well steam reforming works. In this research, a multi-compound biomass tar model including phenol, toluene, naphthalene, and pyrene underwent a steam reforming process. Various types with 10 wt.% of nickel-based catalysts were generated by the co-impregnation technique, which included 90 wt.% different oxide supports (Al2O3, La2O3, and ZrO2) and 10 wt.% of combination alkaline oxide earth promoters (MgO and CaO). Thermogravimetric analysis, Brunauer–Emmett–Teller (BET) method, N2 physisorption, temperature-programmed reduction (H2-TPR), temperature-programmed desorption (CO2-TPD), and X-ray diffraction (XRD) of ni-based catalyst characterized physiochemical properties of the prepared catalyst. The reaction temperature used for steam reforming was 800 °C, an S/C ratio of 1, and a GHSV of 13,500 h−1. Ni/La2O3/MgO/CaO (NiLaMgCa) produced the most carbon to-gas conversion (86.27 mol%) and H2 yield (51.58 mol%) after 5 h of reaction compared to other catalysts tested in this study. Additionally, the filamentous carbon coke deposited on the spent catalyst of NiLaMgCa does not impact the catalyst activity. NiLaMgCa was the best catalyst compared to other catalysts investigated, exhibiting a stable and high catalytic performance in the steam reforming of gasified biomass tar. In conclusion, this study presents a novel approach by adding a combination of MgO and CaO promoters to a ni-based catalyst with various oxide supports, strengthening the metal-support interaction and improving the acid-base balance of the catalyst surface. The mesoporous structure and active phase (metallic Ni) were successfully developed. This can lead to an increase in the conversion of tar to H2 yield gas and a decrease in the production of undesired byproducts, such as CH4 and CO.

H2 produced by catalytic reforming of acetic acid over Ni/char catalyst recycled from the biochar adsorption purification of simulated Ni electroplating wastewater

Hydrogen Production Via Steam Reforming of Acetic Acid over Biochar-Supported Nickel Catalysts

Enhancement of hydrogen-rich gas production by acetic acid steam reforming: characterization of Ni–Co modified biochar-based catalysts

Steam reforming of acetic acid over Ni/biochar catalyst treated with HNO3: Impacts of the treatment on surface properties and catalytic behaviors

Catalytic Reforming of Acetic Acid As a Model Compound of Bio‐oil for Hydrogen Production over Ni‐CeO2‐MgO/olivine Catalysts

Hydrogen-rich syngas production from biomass pyrolysis and catalytic reforming using biochar-based catalysts

Catalytic Steam Reforming of Bio-Oil-Derived Acetic Acid over CeO 2 -ZnO Supported Ni Nanoparticle Catalysts

Char-based Fe-Ni-Ca material for capturing AAEM from biomass pyrolysis volatiles and recyclability in catalytic reforming of volatiles

Catalytic steam reforming of bio-oil model compounds for hydrogen production over coal ash supported Ni catalyst

Effect of Coal Ash on the Steam Reforming of Simulated Bio-oil for Hydrogen Production over Ni/γ-Al2O3

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

Nickel loaded on biochar prepared from different carbon sources for selective hydrogenolysis of diphenyl ether

Effective Catalytic of Rice Straw Pyrolysis over Ni/CaZnAl Catalyst for Producing Hydrogen-Rich Syngas

Hydrogen production from acetic acid steam reforming over Ti-modified Ni/Attapulgite catalysts

Co-presence of hydrophilic and hydrophobic sites in Ni/biochar catalyst for enhancing the hydrogenation activity

Hydrogen-rich syngas production from biomass gasification using biochar-based nanocatalysts

Preparation of High Catalytic Activity Biochar from Biomass Waste for Tar Conversion

The Efficiency of Carbon Conversion and Hydrogen Production from Tar Steam Reforming of Biomass Using Ni-Based Catalysts with Alkaline Earth Promoters

Multifunctional Pd/Ni-Co catalyst for hydrogen production by chemical looping coupled with steam reforming of acetic acid

Hydrogen-rich Syngas Production by Catalytic Cracking of Tar in Wastewater under Supercritical Condition

Additive WO2 promotes Ni - based catalyst for hydrogen production from auto-thermal reforming of acetic acid