Abstract:As tellurides and selenides of Bismuth are extensively used thermoelectric materials in the low-temperature range with refrigeration application, A concerted effort is put forth to boost the ZT by co-doping the pristine Bi 2 Se 3 with antimony (Sb) on cation end and tellurium (Te) on anion side of the compound. The double sintered solid-state reaction method is employed in the preparation of Bi 2 Se 3 and (Bi 1− x Sb x ) 2 Se 2.7 Te 0.3 polycrystalline pellets, with x = 0.02, 0.04, and 0.06. The sample exhibits a rhombohedral structure with the space group of R m. FESEM and EDAX analysis are used to confirm surface morphology and elemental composition of the produced samples. The thermoelectric measurements for the pristine and co-doped samples were conducted by the physical property measurement system as well as a considerable increase in the Seebeck coefficient of − 115 μV/K is observed for 0.02 doping of the Sb which is 4.2 times greater than as for pristine (S = − 28 μV/K). Higher concentration doping ( x = 0.04, 0.06) has not reflected any Seebeck coefficient advancement. In contrast, the lowest total thermal conductivity at a low-temperature regime (< 50 K) is observed for x = 0.06 doping concentration which at near room temperature increases beyond the pristine thermal conductivity; whereas, x = 0.02, 0.04 doping concentration shows a decrement in total thermal conductivity at low, at room temperature region the values are almost equivalent to that of pristine. The co-doped samples' electrical resistivity is substantially less than pristine sample. The highest power factor of 3 × 10 –4 μW/mK 2 is obtained for the x = 0.02 sample. The highest ZT value for the x = 0.02 sample is almost 28 times more than a pristine sample. We conducted a study where we combined experimental and DFT methods to investigate thermoelectric properties incorporated into pristine and doped with antimony and tellurium on Bi 2 Se 3 . We have employed this combination to investigate the partial density of states, Seebeck coefficient, power factor using the Boltzmann transport equation. Theoretical thermoelectric data were derived and compared to experimental observations. Hence, using combined experimental and theoretical investigations helps to predict with higher accuracy of thermoelectric properties of semiconducting materials.

Doping-dependent Thermoelectric Properties of BiSb3Te6 from First-Principle Calculations

Enhanced Thermoelectric Performance of (Sb0.75bi0.25)(2)te-3 Compound from First-Principles Calculations

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Electronic Structures and Thermoelectric Properties of ZnSb Doped with Cd and in from First Principles Calculations

A comprehensive experimental and DFT analysis on thermoelectric properties of Sb, Te co-doped Bi2Se3 polycrystals

RNA FISH for detecting expanded repeats in human diseases.

Band convergence and thermoelectric performance enhancement of InSb via Bi doping

Transport and electrical properties of cryogenic thermoelectric FeSb2: the effect of isoelectronic and hole doping

Enhanced Thermoelectric Properties of Cu3SbSe4 Compounds by Isovalent Bismuth Doping

Roles of Cu in the Enhanced Thermoelectric Properties in Bi0.5Sb1.5Te3

High Power Factor and Thermoelectric Figure of Merit in Sb 2 Si 2 Te 6 through Synergetic Effect of Ca Doping

Doping Effect on Thermoelectric Properties of Nonstoichiometric AgSbTe 2 Compounds

Thermoelectric Power Factor of Doped Bi2O2Se: a Computational Study.

Influence of Ag_2Te Doping on the Thermoelectric Properties of p-type Bi_(0.5)Sb_(1.5)Te_3 Bulk Alloys

Structural features and thermoelectric performance of Sb- and Bi-doped Cu2SnSe3 compounds

Synergistic optimization of the thermoelectric performance of BiSbSe3 using doping and multi-scale defect engineering

Effect of Sb-Doping on the Thermoelectric Properties of Mg2Si Based Compounds

Regulation of exciton for high thermoelectric performance in (Bi, Sb)2Te3 alloys via doping with Pb and multi-scale microstructure

Thermoelectric Performance of Binary Lithium-Based Compounds: Li3Sb and Li3Bi

Electronic Structures and Thermoelectric Properties of La or Ce-Doped Bi2te3 Alloys from First Principles Calculations

Effect of Bi3+ Doping on the Electronic Structure and Thermoelectric Properties of (Sr0.889-xLa0.111Bix)TiO2.963: First-Principles Calculations