Abstract:Silicon-organic solar cells based on conjugated polymers such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on n type silicon (n-Si) attract wide interest because of their potential for cost-effectiveness and high-efficiency. However, a lower barrier height Phi(b) and a shallow built in potential (V-bi) of Schottky junction between n-Si and PEDOT:PSS hinders the power conversion efficiency (PCE) in comparison with those of traditional p-n junction. Here, a strong inversion layer was formed on n Si surface by inserting a layer of 1, 4, 5, 8, 9, 11-hexaazatriphenylene hexacarbonitrile (HAT-CN), resulting in a quasi p-n junction. External quantum efficiency spectra, capacitance-voltage, transient photovoltage decay and minority charge carriers life mapping measurements indicated that a quasi p-n junction was built due to the strong inversion effect, resulting in a high Phi(b) and V-bi. The quasi p-n junction located on the front surface region of silicon substrates improved the short wavelength light conversion into photocurrent. In addition, a derivative perylene diimide (PDIN) layer between rear side of silicon and aluminum cathodes was used to block the holes from flowing to cathodes. As a result, the device with PDIN layer also improved photoresponse at longer wavelength. A champion PCE of 14.14% was achieved for the nanostructured silicon-organic device by combining HAT-CN and PDIN layers. The low temperature and simple device structure with quasi p-n junction promises cost-effective high performance photovoltaic techniques.

Hybrid Silicon Nanocrystal/Poly(3-hexylthiophene-2,5-diyl) Solar Cells from a Chlorinated Silicon Precursor

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Silicon nanocrystals synthesized using very high frequency non-thermal plasma and their application in photovoltaics

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Application of Silicon Nanocrystals in Solar Cells

Hybrid Solar Cells Based on P3ht and Si@Mwcnt Nanocomposite

Fabrication of Si heterojunction solar cells using P-doped Si nanocrystals embedded in SiNx films as emitters

Improved Photovoltaic Performance of MEH‐PPV/PCBM Solar Cells Via Incorporation of Si Nanocrystals

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Hybrid Bulk Heterojunction Solar Cells Based on Poly (3-Hexylthiophene) and Z907-modified ZnO Nanorods

Doped Silicon Nanocrystals From Organic Dopant Precursor By A Sicl4-Based High Frequency Nonthermal Plasma

Development of high conducting phosphorous doped nanocrystalline thin silicon films for silicon heterojunction solar cells application

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

Crystalline Silicon Heterojunction Solar Cell with 81.6% Fill Factor, Deposited by Physical Vapour Deposition Methods Only

Improved Device Performance of Si-based Heterojunction Solar Cells by Using Phosphorus Doped Si Nanocrystals Embedded in SiC Host Matrix

Polymer Solar Cells with an Inverted Device Configuration Using Polyhedral Oligomeric Silsesquioxane-[60]Fullerene Dyad As a Novel Electron Acceptor

Nanocrystalline‐silicon hole contact layers enabling efficiency improvement of silicon heterojunction solar cells: Impact of nanostructure evolution on solar cell performance

Hybrid poly (3-hexylthiophene)/titanium dioxide nanorods material for solar cell applications

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Hybrid Photovoltaic Cells Based on Zno/Sb2s3/P3ht Heterojunctions