Abstract:In this article, using controllable magnetron sputtering of indium tin oxide (ITO) materials on single crystal silicon at 100 °C, the optoelectronic heterojunction frame of ITO/a-SiOx(In)/n-Si is simply fabricated for the purpose of realizing passivation contact and hole tunneling. It is found that the gradation profile of indium (In) element together with silicon oxide (SiOx/In) within the ultrathin boundary zone between ITO and n-Si occurs and is characterized by X-ray photoelectron spectroscopy with the ion milling technique. The atomistic morphology and physical phase of the interfacial layer has been observed with a high-resolution transmission electron microscope. X-ray diffraction, Hall effect measurement, and optical transmittance with Tauc plot have been applied to the microstructure and property analyses of ITO thin films, respectively. The polycrystalline and amorphous phases have been verified for ITO films and SiOx(In) hybrid layer, respectively. For the quantum transport, both direct and defect-assisted tunneling of photogenerated holes through the a-SiOx(In) layer is confirmed. Besides, there is a gap state correlative to the indium composition and located at Ev + 4.60 eV in the ternary hybrid a-SiOx(In) layer that is predicted by density functional theory of first-principles calculation, which acts as an "extended delocalized state" for direct tunneling of the photogenerated holes. The reasonable built-in potential (Vbi = 0.66 V) and optimally controlled ternary hybrid a-SiOx(In) layer (about 1.4 nm) result in that the device exhibits excellent PV performance, with an open-circuit voltage of 0.540 V, a short-circuit current density of 30.5 mA/cm2, a high fill factor of 74.2%, and a conversion efficiency of 12.2%, under the AM 1.5 illumination. The work function difference between ITO (5.06 eV) and n-Si (4.31 eV) is determined by ultraviolet photoemission spectroscopy and ascribed to the essence of the built-in-field of the PV device. In addition, the strong inversion layer in the surface of the n-Si substrate is tentatively correlated to the a-SiOx(In) interface layer as well.

Hybrid Photovoltaic Cells Based on Zno/Sb2s3/P3ht Heterojunctions

Hybrid Nonfused Electron Acceptors with Perylene Diimide Pendants for Organic Solar Cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Solar Cells with ZnO As Electron-Transporting Materials

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Hybrid Bulk Heterojunction Solar Cells Based on Poly (3-Hexylthiophene) and Z907-modified ZnO Nanorods

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Hybrid Solar Cells Using Solution-Processed TiO2/Sb2S3 Bilayer As Electron Transport Layer

Tuning Recombination and Charge Separation in a n/p/p Heterojunction Solar Cell with CZTS, Ag3SbS3 and a Carbon Interlayer

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

Hybrid Solar Cells Based on P3ht and Si@Mwcnt Nanocomposite

Sb 2 Se 3 /CsPbBrI 2 All-Inorganic p–n Heterojunction Solar Cells

Enhanced Performance of the Sb 2 Se 3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination

In Situ Investigation of Interfacial Properties of Sb2Se3 Heterojunctions

Panchromatic heterojunction solar cells for Pb-free all-inorganic antimony based perovskite

Enhancing the Performance of Perovskite Solar Cells by Hybridizing SnS Quantum Dots with CH3NH3PbI3

High Efficient Planar-Heterojunction Solar Cells Achieved by Using A Smooth Ch3nh3pbi3 Film Via A New Approach of Forming the Pbi2 Nanostructure Together with Strategically High Ch3nh3i Concentration

Effective Passivation and Tunneling Hybrid a-SiOx(In) Layer in ITO/n-Si Heterojunction Photovoltaic Device

Identifying Optimal Inorganic Nanomaterials for Hybrid Solar Cells

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer