Abstract:Columns of overpasses are highly exposed to the potential hazard of vehicular collisions. This type of collisions occurred in the past, sometimes with catastrophic consequences. Previous research reported in the literature has explored the dynamic response of RC column under impact loading using both numerical and experimental methods. The majority of the available tests were performed on horizontal elements featuring beam characteristics. In this context, a new facility for the testing of vertical elements featuring the real characteristics of RC columns was realized in the Collision Laboratory of Nanjing Tech University. Four impact tests on cantilever circular RC column were conducted using this facility. The diameter of the column is 330 mm and the height is 1700 mm The column is a one-third scaled model of a 5.2 m tall RC bridge pier. All the columns have the same configuration of the longitudinal reinforcement bars and two different hoop spacings both representing the case of a low shear reinforced structural element. Impact force, lateral displacements and accelerations were measured. A high-speed camera was adopted to record the evolution of the damage of the RC column during the impact. A brittle shear-type damage was observed characterized by one main diagonal crack located from the rear base of the column to the base of the impact point. Finally, a numerical study was also conducted using LS-DYNA showing a good agreement with the experimental results, especially in the low-velocity impacts. Results highlighted the vulnerability of these structural elements under impact loading. (C) 2017 The Authors. Published by Elsevier Ltd.

Internally Nested Circular Tube System Subjected to Lateral Impact Loading

A comparison of the impact behavior of RC and CFT circular columns under lateral impact loading *

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Behavior Of Concrete Filled Tubes And Confined Concrete Filled Tubes Under High Speed Impact

Theoretical Analysis on the Collapse of Dumbbell-Shaped Tubes

Lateral Compression Behaviors of Thin-Walled Equilateral Triangular Tubes

Experiment and numerical simulation of thin-walled cylindrical containers subjected to lateral impact

Impact Crushing and Rebound of Thin-Walled Hollow Spheres

Plastic Deformation of Metal Tubes Subjected to Lateral Blast Loads

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Crashworthiness Analysis of Self-Similar Nested Hierarchical Hexagonal Tubes

Investigation of energy absorption characteristics of circular paper tubes under axial impact loading

A numerical study on energy absorption capability of lateral corrugated composite tube under axial crushing

Denting and Failure of Liquid-Filled Tubes under Lateral Impact

Dynamic responses of corrugated cylindrical shells subjected to nonlinear low-velocity impact

Experimental, numerical, and theoretical studies of the response of short cylindrical stainless steel tubes under lateral air blast loading

Simulation Analysis of Inner Force Characteristics of Car Body Thin-walled Beam Structures Subject to Lateral Impact

Experimental and numerical study of circular, stainless thin tube energy absorber under axial impact by a control rod