Experimental investigation on axial compression behaviour of cold-formed thick-walled steel tubes
Pengfei Men,Jin Di,Fengjiang Qin,Enze Lin,Jie Wang,Xi Peng
DOI: https://doi.org/10.1016/j.jcsr.2023.108431
IF: 4.349
2024-01-15
Journal of Constructional Steel Research
Abstract:This paper presents an experimental and numerical investigation on the stability behaviour of cold-formed thick-walled steel tubes. Axial compression tests were conducted on 15 steel tubes with square and rectangle cross-sections to investigate their structural behaviours . The primary test parameters were slenderness and width-to-thickness ratios. Material properties , failure modes, load-deflection curves, and load-strain curves of the specimens are discussed. Furthermore, a numerical simulation was conducted to further investigate the effects of the slenderness ratio, width-to-thickness ratio, and initial geometric imperfection on the axial compression behaviour of cold-formed thick-walled tubes. Based on the experimental and numerical results, the applicability of the design codes, GB50018–2002, AISI S100–16, and EN 1993-1-1 was assessed. Results revealed that all three codes predicted the yield strength well after considering the cold-formed effect. With an increase in the slenderness ratio, GB50018–2002 and AISI S100–16 yielded increasingly unsafe predictions for overall stability, whereas EN 1993-1-1 yielded safe predictions. Finally, a modified design method for the overall buckling resistance of cold-formed thick-walled rectangular tubes under axial compression was proposed based on EN 1993-1-1 and verified using test and FEM results.
construction & building technology,engineering, civil