Abstract:Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle. The oblique collision happening in vehicle accidents poses a huge threat to passive safety, which causes great difficulties in the design of energy absorption (EA) structures and the prediction of EA capacity due to its highly nonlinear deformation characteristics. This study aims to establish a theoretical prediction model for the compression performance of Carbon Fiber Reinforced Polymer (CFRP)/Al hybrid tube considering the loading angle. First, a high‐precision FE model was established to obtain the influence laws of tube diameter, Al thickness, and CFRP thickness on the crashworthiness of CFRP/Al hybrid tubes, laying the foundation for subsequent theoretical model validation. Second, by summarizing the deformation modes of hybrid tubes generated by various parameter combinations, a modified global origami deformation assumption was proposed under multi‐angle compression conditions, and the key terms in energy composition are extracted based on the initial and final states of folding elements. Third, a theoretical model for predicting the mean crushing forces (MCFs) of hybrid tubes was established by revealing the correlation mechanism between energy composition terms and loading angle. Finally, the theoretical prediction model was validated by experiment and simulation results and the application premise was given. Results showed that the theoretical prediction model was proved to be of high accuracy, as the average absolute prediction errors of MCF under axial, 10°, 20°, and 30° compression conditions were 6.54%, 4.63%, 3.72%, and 3.93%, respectively. This study provides valuable guidance for the forward design and development of multi‐material hybrid structures facing complex crushing conditions. Highlights An analytical model of the hybrid circular tubes considering compression angle is newly proposed. Deformation mode and axial crushing response are analyzed by experiments. The major energy dissipation mechanism for hybrid circular tubes is explicitly derived. The Al thickness has the most significant impact on energy absorption. The recommendations for the design and development of hybrid tube are provided.

A numerical study on energy absorption capability of lateral corrugated composite tube under axial crushing

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing

Compression behaviour and crashworthiness analysis of aluminum foam filled corrugated and tapered tubes with graded thickness

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Crashworthiness analysis of shrink circular tube energy absorbers with anti-climbers under multiple loading cases

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Crushing responses and energy absorption behaviors of multi-cell CFRP tubes

Energy absorption characteristics of a foam-filled tri-tube under axial quasi-static loading: experiment and numerical simulation

A comparative study on energy absorption of flat sides and corner elements in CFRP square tube under axial compression

Crashworthiness analysis of double-corrugated multicellular tubes under axial impact

Crash Energy Absorption of Braided Composite Tubes and its Application in Vehicle Passive Safety

On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Crashworthiness analysis and optimization design of special-shaped thin-walled tubes by experiments and numerical simulation

Crushing responses of carbon/glass hybrid composite tubes under dynamic compressive loads

Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Effect of reinforcement layer number on energy absorption of aluminum-CFRP hybrid square tubes under axial loading: Experimental and numerical study