Abstract:This paper studies the impact and rebound behaviour of a thin-walled elastic-plastic circular ring after it impinges onto a rigid wall with initial velocity V-0 by finite element method. Through the dimensional analysis and a systematic simulation with different ring geometries and material properties, three non-dimensional parameters are identified, which dominate the impact duration and rebound velocity of the ring; and they are: (1) the ratio of wall thickness to average radius, eta=h/R; (2) the yield strain of the material, Y/E; and (3) the non-dimensional initial velocity of the ring, nu = V-0/V-Y, where V-Y = Y/(E rho)(1/2) denotes the yield velocity of the material [3].When the initial velocity is low, the impact between the ring and rigid plate remains elastic, the compression duration could be analytically obtained, and it agrees well with the numerical results, while the restitution duration is about 3/4 of the compression duration. The corresponding coefficient of restitution (COR) is found to be independent from the material property, whereas it increases from 0.75 to 0.78 when the thickness ratio changes from 1/20 to 1/40. With the increasing of initial velocity, a four-hinge crushing mode and a subsequent five-hinge mode are identified, which are different from the crushing mode of a ring under static compression. The variations of compression and restitution durations, rebound velocity and COR are discussed in detail, while some of them are compared with those of the impact of a solid ball onto a rigid wall. The effects of the ring geometry and material properties on these variables are also presented. The rebound velocity is found to reach the maximal at about a half of material's yield velocity when the initial velocity of the ring is about twice of the yield velocity, resulting in COR being 0.25 for all the materials and geometries adopted in this paper. (C) 2014 Elsevier Ltd. All rights reserved.

Impact Crushing and Rebound of Thin-Walled Hollow Spheres

Collision and Rebound Behavior of Elastic Circular Ring Impinging on Elastic Column

Impact and Rebound of an Elastic–plastic Ring on a Rigid Target

Collision and Rebound of Ping Pong Balls on A Rigid Target

Dynamic behavior of circular ring impinging on ideal elastic wall: Analytical model and experimental validation

Study on Dynamic Response and Energy Absorbing Characteristics of Shallow Spherical Shells Under Impact Loads

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Experiment and numerical simulation of thin-walled cylindrical containers subjected to lateral impact

Lateral Compression Behaviors of Thin-Walled Equilateral Triangular Tubes

Numerical simulations of the normal impact of adhesive microparticles with a rigid substrate

Dynamic responses of corrugated cylindrical shells subjected to nonlinear low-velocity impact

Experiment Research on Axial Dynamic Buckling of Thin-Wall Cylindrical Shells Based on Finite Element Model

Analysis on the fragmentation pattern of sphere hypervelocity impacting on thin plate

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Experimental and Numerical Study on the Dynamic Buckling of Ping-pong Balls under Impact Loading

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Dynamic Crushing Behavior and Energy Absorption of Graded Lattice Cylindrical Structure under Axial Impact Load

Prediction of Coefficient of Restitution for Impact Elastoplastic Spheres Considering Finite Plate Thickness

On the bending force response of thin-walled beams under transverse loading

A Void Growth Model Considering the Bauschinger Effect and Its Application to Spall Fracture

Dynamic Crushing Behavior of Random and Functionally Graded Metal Hollow Sphere Foams