Abstract:This paper studies the impact and rebound behaviour of a thin-walled elastic-plastic circular ring after it impinges onto a rigid wall with initial velocity V-0 by finite element method. Through the dimensional analysis and a systematic simulation with different ring geometries and material properties, three non-dimensional parameters are identified, which dominate the impact duration and rebound velocity of the ring; and they are: (1) the ratio of wall thickness to average radius, eta=h/R; (2) the yield strain of the material, Y/E; and (3) the non-dimensional initial velocity of the ring, nu = V-0/V-Y, where V-Y = Y/(E rho)(1/2) denotes the yield velocity of the material [3].When the initial velocity is low, the impact between the ring and rigid plate remains elastic, the compression duration could be analytically obtained, and it agrees well with the numerical results, while the restitution duration is about 3/4 of the compression duration. The corresponding coefficient of restitution (COR) is found to be independent from the material property, whereas it increases from 0.75 to 0.78 when the thickness ratio changes from 1/20 to 1/40. With the increasing of initial velocity, a four-hinge crushing mode and a subsequent five-hinge mode are identified, which are different from the crushing mode of a ring under static compression. The variations of compression and restitution durations, rebound velocity and COR are discussed in detail, while some of them are compared with those of the impact of a solid ball onto a rigid wall. The effects of the ring geometry and material properties on these variables are also presented. The rebound velocity is found to reach the maximal at about a half of material's yield velocity when the initial velocity of the ring is about twice of the yield velocity, resulting in COR being 0.25 for all the materials and geometries adopted in this paper. (C) 2014 Elsevier Ltd. All rights reserved.

Experimental and Numerical Study on the Dynamic Buckling of Ping-pong Balls under Impact Loading

Collision and Rebound of Ping Pong Balls on A Rigid Target

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Impact Crushing and Rebound of Thin-Walled Hollow Spheres

Experimental investigation and computer simulation on dynamic buckling behavior of liquid-filled cylindrical shells under axial impact

Study on Dynamic Response and Energy Absorbing Characteristics of Shallow Spherical Shells Under Impact Loads

Impact Experiment and Buckling Criterion Analysis of Thin-Walled Cylindrical Shells

Dynamic response of cylindrical shell supporting structure under multiple impacts: experimental and numerical investigation

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Experiment Research on Axial Dynamic Buckling of Thin-Wall Cylindrical Shells Based on Finite Element Model

Impact of a ping-pong ball

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Experiment and numerical simulation of thin-walled cylindrical containers subjected to lateral impact

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Impact and Rebound of an Elastic–plastic Ring on a Rigid Target

Numerical analysis of dynamic buckling of rectangular plates subjected to intermediate-velocity impact

Contact and compression of elastic spherical shells: The physics of a ‘ping-pong’ ball

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression