Abstract:To enhance the impact resistance of hydraulic columns, a theoretical analysis method was employed to develop a dynamic characteristic analysis model for conventional columns under impact loads. This model facilitated the derivation of key parameters such as equivalent stiffness, maximum retraction amount, and impact duration. A fluid-solid coupling model for the conventional column was constructed using finite element and coupled Eulerian-Lagrangian (CEL) methods. Subsequently, numerical simulation results were compared and analyzed against theoretical predictions. Based on this analysis, an energy-absorbing column was designed, and its fluid-solid coupling model was established to investigate its mechanical response under static and dynamic impact loads.The findings indicate that under a static load of 2000 kN, when superimposed with impact loads of 200 kJ, 400 kJ, and 800 kJ respectively, the peak impact forces on energy-absorbing columns are 89.20%, 91.72%, and 98.42% lower than those on normal columns. The yield displacements of energy-absorbing columns increase by 142.26%, 109.15%, and 108.41% compared to normal columns. Energy absorption in energy-absorbing columns is 152.11%, 171.80%, and 145.18% higher than in normal columns. Furthermore, initial velocities of energy-absorbing columns are consistently lower compared to normal columns. After reaching initial velocity, energy-absorbing columns exhibit reduced oscillations due to interactions between the energy absorber, column, and hydraulic fluid system under impact loads. Unlike normal columns, energy-absorbing columns mitigate stress concentration at the column head through interactions between the energy absorber, emulsion, and column. Additionally, the impact resistance time of energy-absorbing columns is 2.19, 1.64, and 1.85 times longer than that of normal columns.Energy-absorbing columns outperform conventional columns across six metrics: peak impact force, column yield displacement, energy absorption, column movement speed, stress distribution, and impact resistance time, demonstrating superior mechanical properties in impact resistance.

Collision and Rebound Behavior of Elastic Circular Ring Impinging on Elastic Column

Dynamic behavior of circular ring impinging on ideal elastic wall: Analytical model and experimental validation

Dynamic Behavior of Elastic Bars and Beams Impinging on Ideal Springs

Impact and Rebound of an Elastic–plastic Ring on a Rigid Target

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Response of shear-deficient reinforced circular RC columns under lateral impact loading

Impact Crushing and Rebound of Thin-Walled Hollow Spheres

Collision and Rebound of Ping Pong Balls on A Rigid Target

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Impact Tests of Model RC Columns by an Equivalent Truck Frame

Dynamic Process of Ring Systems As Energy Absorber Subjected to Lateral Impact Loading

Dynamic Analysis of Structural Columns Subjected to Impulsive Loading

Dynamic behaviors of eccentrically loaded RC column under lateral low-velocity impact

Dynamic performance of flexure-failure-type rectangular RC columns under low-velocity lateral impact

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

Energy Absorption in Ring Systems

Numerical analysis of impact resistance mechanical properties of energy-absorbing columns under static and dynamic loads

Study on the Influence of Contact Behavior on Nonlinear Stiffness Characteristics of Elastic Rings

Transient Impact Response Analysis of an Elastic–plastic Beam

Application of Flores model considering variable recovery coefficient in dynamics analysis of ball bearings