Abstract:This paper studies the impact and rebound behaviour of a thin-walled elastic-plastic circular ring after it impinges onto a rigid wall with initial velocity V-0 by finite element method. Through the dimensional analysis and a systematic simulation with different ring geometries and material properties, three non-dimensional parameters are identified, which dominate the impact duration and rebound velocity of the ring; and they are: (1) the ratio of wall thickness to average radius, eta=h/R; (2) the yield strain of the material, Y/E; and (3) the non-dimensional initial velocity of the ring, nu = V-0/V-Y, where V-Y = Y/(E rho)(1/2) denotes the yield velocity of the material [3].When the initial velocity is low, the impact between the ring and rigid plate remains elastic, the compression duration could be analytically obtained, and it agrees well with the numerical results, while the restitution duration is about 3/4 of the compression duration. The corresponding coefficient of restitution (COR) is found to be independent from the material property, whereas it increases from 0.75 to 0.78 when the thickness ratio changes from 1/20 to 1/40. With the increasing of initial velocity, a four-hinge crushing mode and a subsequent five-hinge mode are identified, which are different from the crushing mode of a ring under static compression. The variations of compression and restitution durations, rebound velocity and COR are discussed in detail, while some of them are compared with those of the impact of a solid ball onto a rigid wall. The effects of the ring geometry and material properties on these variables are also presented. The rebound velocity is found to reach the maximal at about a half of material's yield velocity when the initial velocity of the ring is about twice of the yield velocity, resulting in COR being 0.25 for all the materials and geometries adopted in this paper. (C) 2014 Elsevier Ltd. All rights reserved.

Dynamic behavior of circular ring impinging on ideal elastic wall: Analytical model and experimental validation

Collision and Rebound Behavior of Elastic Circular Ring Impinging on Elastic Column

Impact and Rebound of an Elastic–plastic Ring on a Rigid Target

Dynamic Behavior of Elastic Bars and Beams Impinging on Ideal Springs

Impact Crushing and Rebound of Thin-Walled Hollow Spheres

Analytical Analysis of the Longitudinal Response of Shield Tunnel Lining Considering Ring-to-ring Interaction

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Collision and Rebound of Ping Pong Balls on A Rigid Target

Dynamic Process of Ring Systems As Energy Absorber Subjected to Lateral Impact Loading

Dynamic modeling of a sliding ring on an elastic rod with incremental potential formulation

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

The behaviors of particle-wall collision for non-spherical particles: Modeling analysis

Transient Impact Response Analysis of an Elastic–plastic Beam

Study on the Influence of Contact Behavior on Nonlinear Stiffness Characteristics of Elastic Rings

Counter-intuitive Breathing Mode Response of an Elastic–plastic Circular Ring Subjected to Axisymmetric Internal Pressure Pulse

Modeling and experiments on the vibro-acoustic analysis of ring stiffened cylindrical shells with internal bulkheads: A comparative study

Energy Absorption in Ring Systems

Planar Dynamics of A Rigid Body System with Frictional Impacts. Ii. Qualitative Analysis and Numerical Simulations

Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation

Dynamic behaviors of angular contact ball bearings based on nonlinear dynamic model with flexible ring and cage motion whirl

Packing of elastic rings with friction