Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

A 100-TW Th:Sapphire Laser System at a Repetition Rate of 0.1 Hz

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

A High-Pulse-Energy High-Beam-Quality Tunable Ti:Sapphire Laser Using a Prism-Dispersion Cavity

High-Power and High-repetition-rate widely tunable Narrow-Linewidth low-gain-band Ti: Sapphire laser

3 GHz, Yb-fiber laser-based, few-cycle ultrafast source at the Ti:sapphire laser wavelength

High-contrast 1.16 PW Ti:sapphire laser system combined with a doubled chirped-pulse amplification scheme and a femtosecond optical-parametric amplifier

Progress on Developing A Pw Ultrashort Laser Facility with Ns, Ps and Fs Outputting Pulses

396 MHz CPA femtosecond laser system based on a single crystal fiber rod-type amplifier

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

Diode-Pumped 50 Hz–10 J Nano-Second Nd:YAG Laser

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

The Design of >2000-nm, ∼100-MHz Ultrafast Tm-Doped Fiber Soliton Laser Source

High-Power Solid-State Lasers for High-Energy-Density Physics Applications at Caep

180 Mj, Long-Pulse-duration, Master-Oscillator Power Amplifier with Linewidth Less Than 256 Khz for Laser Guide Stars

Precise Control of Femtosecond Ti:sapphire Laser Frequency Comb

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure

Generation of 4.5mw Femtosecond Pulse with A Compact All Solid-State Cavity-Dumped Ti : Sapphire Laser

Femtosecond Amplifier Similariton Yb:fiber Laser at a 616 MHz Repetition Rate.

High-energy, high-peak-power diode-pumped Q-switched Tm:YAG laser at 2.02 μm with tunable repetition rate from 100 Hz to 1000 Hz