Abstract:Generally, when two surfaces in contact move relative to each other, friction, wear, and lubrication occur. One of the methods for changing the characteristics of two surfaces in relative motion is to process a pattern on a surface; this method is referred to as surface texturing. Studies have used various approaches to identify friction characteristics through patterns. However, relatively insufficient research has been conducted on array of patterns. As the pressure of surface lubricants can vary depending on the arrangements of patterns, it is necessary to understand the friction characteristics with respect to the arrangements. In this study, the friction effect according to the shape and arrangement of the pattern was evaluated through friction experiment that takes into account the slope effect and the asperity contact, and proposed and executed a new method for the lubrication analysis of the rough surfaces. The patterns and roughness were produced by laser processing and particle jetting (AAJ) of the experimental specimens and friction experiments were performed with the fabricated specimens. The new lubrication analysis was performed for the four types of patterns (Reference surface, X-direction-line groove, X-direction-line + zigzag groove, X-direction-zigzag + line groove). The validity of the analysis was verified by comparing the results from the experiment and analysis under the same pattern and friction conditions. The results from the friction experiment and lubrication analysis showed a similar tendency to that of the friction coefficient. As a result of the lubrication analysis, it was found that the friction characteristics according to the arrangement of the pattern may have greater or smaller friction compared to the reference surface when considering the influence of the slope. Although it did not appear clearly in the experiment due to limitations in the experimental conditions, it was confirmed that the lubrication analysis and experimental results were similar. As a result of analyzing the friction phenomenon appearing from the application of various arrangement of patterns considering asperity contact, it was possible to identify an effective pattern arrangement for reducing friction.

Experimental Investigation into Friction Performance of Dimples Journal Bearing with Phyllotactic Pattern

Design and Fabrication of the Lubricating Dimple of the Headface Sliding Bearing with Phyllotactic Pattern

Study of offset factor and depths of dimple on the performance of two-lobe journal-bearings

Investigation of the Effect of Milli-Scale Dimples on Planar Contact Lubrication

Experimental investigation for vibration reduction of surface-textured journal bearings

Optimal design of micro-dimples on crankpin bearing surface for improving engine’s lubrication and friction

A Novel Surface Texture Shape for Directional Friction Control

Effect of Wide Dimples on Planar Contact Lubrication

Effect of Micro-Dimple Texture on the Tribological Performance of Brass with Titanium Nitride (TiN) Coating under Oil-Lubricated Conditions

Self-adaptive surface texture design for friction reduction across the lubrication regimes

Influence of Microdimple on Lubrication Performance of Textured Plunger Pump

Effect of Micro-Dimple Geometry on the Tribological Characteristics of Textured Surfaces

Evaluation and Optimization of Axial Piston Pump Textured Slipper Bearings with Spherical Dimples Based on Hybrid Genetic Algorithm

Drag Reduction by Dimples on Surfaces in Plane–Plane Contact Lubrication

Investigation of the Effect of Cavitation and Journal Whirl on Static and Dynamic Characteristics of Journal Bearing

Friction Reduction Performance of Microstructured Surfaces Generated by Nonresonant Modulation Cutting

Frictional Characteristics of Tilting Pad Bearings According to Pattern Arrangement on Rough Surface Considering Asperity Contact

Surface Texturing for Low Friction Mechanical Components

Study on the effects of the textured surface to improve the performance of cylinder block/valve plate interfaces

CFD Analysis of Journal Bearing by Modifying The Roughness Surface

The influences of lubricant groove shape on the tribological properties of journal bearing under the grease lubrication conditions