Abstract:A functionally structured catalyst was explored for ethanol steam reforming (ESR) to generate H2. Aluminum lathe waste strips were employed as the structured catalytic framework. The mixed metal oxide (Li-Al-O) was formed on the surface of Al lathe waste strips through calcination of the Li-Al-CO3 layered double hydroxide (LDH), working as the support for the formation of Ni catalyst nanoparticles. NaOH and NaHCO3 titration solutions were, respectively, used for adjusting the pH of the NiCl2 aqueous solutions at 50 °C when developing the precursors of the Ni-based catalysts forming in-situ on the Li-Al-O oxide support. The Ni precursor on the Al structured framework was reduced in a H2 atmosphere at 500 °C for 3 h, changing the hydroxide precursor into Ni nanoparticles. The titration agent (NaOH or NaHCO3) effectively affected the physical and chemical characterizations of the catalyst obtained by the different titrations. The ESR reaction catalyzed by the structured catalysts at a relatively low temperature of 500 °C was studied. The catalyst using NaHCO3 titration presented good stability for generating H2 during ESR, achieving a high rate of H2 volume of about 122.9 L/(gcat·h). It also had a relatively low acidity on the surface of the Li-Al-O oxide support, leading to low activity for the dehydration of ethanol and high activity to H2 yield. The interactions of catalysts between the Ni precursors and the Li-Al-O oxide supports were discussed in the processes of the H2 reduction and the ESR reaction. Mechanisms of carbon formation during the ESR were proposed by the catalysts using NaOH and NaHCO3 titration agents.

Preparation and Catalytic Behavior of Second Metal Ni Supported on a Novel Conductive Structured Cu/γ-Al2O3/Al Catalysts Through Electrolysis on Steam Reforming of Dimethyl Ether

A Structured Cu-based/γ-Al2O3/Al Plate-Type Catalyst for Steam Reforming of Dimethyl Ether: Self-activation Behavior Investigation and Stability Improvement

Improvement of a Mesh-Type Cu/Ni/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether by Metal (Fe, Zn or La) Addition for CO in Situ Removal

A Plate-Type Anodic Alumina Supported Nickel Catalyst for Methane Steam Reforming

Oxidative Steam Reforming of Methanol over Cu-Based Catalysts

A Monolith CuNiFe/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether and Applied in a Microreactor

Innovative Cu/Ni/Fe/γ-Al2O3/Al Mesh-Type Catalyst and Compact Plate Reactor Design for Steam Reforming of Dimethyl Ether

Steam reforming of dimethyl ether over a novel anodic γ-Al2O3 supported copper bi-functional catalyst

A Structured Cu-Based/γ-Al2O3/Al Multifunctional Catalyst for Steam Reforming of Dimethyl Ether: Investigation on In-Situ CO Reduction Strategy

Application of Porous Anodic Alumina Monolith Catalyst in Steam Reforming of Dimethyl Ether: Cu/γ-Al2O3/Al Catalyst Degradation Behaviors and Catalytic Activity Improvement by Pre-Competition Impregnation Method

A novel catalyst with plate-type anodic alumina supports, Ni/NiAl2O4/γ-Al2O3/alloy, for steam reforming of methane

Electrodeposition of a Li-Al Layered Double Hydroxide (LDH) on a Ball-Like Aluminum Lathe Waste Strips in Structured Catalytic Applications: Preparation and Characterization of Ni-Based LDH Catalysts for Hydrogen Evolution

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Dually Confined Ni-based Catalysts by Ion-Exchange Inverse Loading for Dry Reforming of Methane

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Experimental and DFT Studies on Diesel-Steam-reforming to Hydrogen over a Bimetallic Rh–Ni-based MgO-Al2O3 Microsphere Catalyst

Improved Charge Transfer and Morphology on Ti-modified Cu/γ-Al2O3/Al Catalyst Enhance the Activity for Methanol Steam Reforming

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

Experimental and Dft Studies on Diesel-Steam-Reforming to Hydrogen over a Bimetallic Rh–Ni Microsphere Catalyst

In-Situ Co-Precipitation of Ni-Mg-Al-Ldh Catalytic Precursor on Y-Al2o3 for Dry Reforming of Methane: Synthesis and Evaluation

Balancing Ni0 and Ni2+ on Γ‐al2o3 for Efficient Steam Methane Reforming