Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3>CO2 reforming of methane, also known as dry reforming of methane, has received significant attention because this technology can convert notorious greenhouse gases (CH4/CO2) into useful syngas (H2/CO). However, this technology still hasn't been commercialized, primarily due to the lack of feasible catalysts. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3>Based on zirconia (ZrO2) nanoparticles with pure monoclinic (m) or tetragonal (t) crystal phase, three nickel (Ni) catalysts (Ni/m‐ZrO2, Ni/t‐ZrO2 and Ni/m‐ZrO2@Al2O3) have been synthesized for CO2 reforming of methane. The Ni/t‐ZrO2 catalyst exhibited lowest reforming activity with CH4 conversion of 15.5% at 700 °C under 1 atm with a gas hourly space velocity (GHSV) of 96 000 mL/(h gcat). The Ni/m‐ZrO2 catalyst showed much higher initial activity but underwent severe deactivation, over which CH4 conversion decreased from 56.1% to 33.4% after 300 min of reaction. The nanocomposite Ni/m‐ZrO2@Al2O3 catalyst with confinement effect possessed the best activity and good stability. Specifically, its CH4 conversion decreased merely from 60.2% to 55.3% after 24 h of reaction. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3>Structural characterizations demonstrate that limited specific surface area and weak metal‐support interactions existed on the Ni/t‐ZrO2 catalyst, which led to large Ni nanoparticles and thus poor reforming activity. Both Ni/m‐ZrO2 and Ni/m‐ZrO2@Al2O3 catalysts had high specific surface area and tiny Ni nanoparticles, which may rationalize the high reforming activity. The improved stability on the Ni/m‐ZrO2@Al2O3 catalyst was mainly related to the alleviated carbon deposition endowed by enriched surface basicity and strengthened metal‐support interactions. This article is protected by copyright. All rights reserved.</section>

A novel catalyst with plate-type anodic alumina supports, Ni/NiAl2O4/γ-Al2O3/alloy, for steam reforming of methane

Preparation of an Anodic Alumina-Supported Ni Catalyst and Development of a Catalytic Plate Reformer for the Steam Reforming of Methane

Balancing Ni0 and Ni2+ on Γ‐al2o3 for Efficient Steam Methane Reforming

Catalytic performance of Ni catalysts for steam reforming of methane at high space velocity

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

High-Stability ZnAl2O4 Spinel-Supported Nickel Catalyst for High-Temperature Syngas Methanation

Highly dispersed Ni/Al2O3 catalysts for dry reforming of methane prepared by alkaline-induced adsorption process

Spherical Ni Nanoparticles Supported by Nanosheet-Assembled Al 2 O 3 for Dry Reforming of CH 4 : Elucidating the Induction Period and Its Excellent Resistance to Coking

Synthesis Chemistry and Properties of Ni Catalysts Fabricated on SiC@Al2O3 Core-Shell Microstructure for Methane Steam Reforming

A nanoscale Ni/ ZrO 2 catalyst coated with Al 2 O 3 for carbon dioxide reforming of methane

Unbounding the Future: Designing NiAl‐based Catalysts for Dry Reforming of Methane

Metal-Organic Framework-Templated Synthesis of Nickel-Alumina Nanocatalysts Improves Catalyst-Support Interaction for Higher Activity and Stability in Biogas Reforming under Controlled Oxidizing Conditions

Nickel based catalysts supported on porous support for methane steam reforming: potential and short review

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

Supported nickel catalysts for low temperature methane steam reforming: comparison between metal additives and support modification

Modulating oxidation state of Ni/CeO<sub>2</sub> catalyst for steam methane reforming: a theoretical prediction with experimental verification

Porous Nickel‐Alumina Derived from Metal‐Organic Framework (MIL‐53): A New Approach to Achieve Active and Stable Catalysts in Methane Dry Reforming

Robust nanosheet-assembled Al 2 O 3 -supported Ni catalysts for the dry reforming of methane: the effect of nickel content on the catalytic performance and carbon formation

Rational design of nickel-based catalyst coupling with combined methane reforming to steadily produce syngas

γ-Al 2 O 3 sacrificial template method for preparing flower-like Ni–Mg–Al catalysts for dry reforming of methane

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al2O3 and their catalytic performance for low-temperature CO2 reforming of CH4