Abstract:The objective of this study is to develop infrared reflective coatings with excellent service performance in extreme environments, aimed at reducing system energy consumption and enhancing service life. In this work, CoCrFeNiMo 0.2 high-entropy alloy (HEA) powder was deposited on the 316 L stainless steel (SS) substrate using High-Velocity Air Fuel (HVAF) thermal spray technology. The microstructure, mechanical properties, infrared reflectivity, and corrosion resistance of the coatings under different spraying parameters were investigated and compared with those of the substrate. Computational Fluid Dynamics (CFD) simulation was employed to analyze the influence of HVAF spraying parameters on flame characteristics and particle flight behavior, providing guidance for optimizing the spraying process and explaining underlying mechanisms. Results demonstrated that adjusting parameters such as propane and air pressure, spraying distance, and powder feed rate could produce dense coatings with <1 % porosity. The microhardness of the coatings was approximately 1.8 times that of the substrate, and the bonding strength between the coating and the substrate is increased to 39.4 MPa. Additionally, the near-infrared reflectivity of the coatings was significantly higher than that of the substrate, with an enhancement of 18.7 %. Coatings sprayed under different parameters exhibited superior passivation and pitting corrosion resistance compared to the substrate in 3.5 wt% NaCl and 1 mol/L HCl solutions. Optimization of spraying parameters further enhanced the protective capability of the passivation film and corrosion resistance. Consequently, CoCrFeNiMo 0.2 HEA coatings prepared by HVAF spraying technology demonstrate excellent comprehensive performance, holding promising potential for industrial applications.

Microstructure and Properties of Hvof-Sprayed Nicraly Coatings Modified by Rare Earth

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Mechanical Properties and Thermal Shock Resistance of HVOF Sprayed NiCrAlY Coatings Without and with Nano Ceria

The preparation and properties of iron base self-fluxing alloy spray-welding coatings with different rare earths and chromium content

Effect of Heat Treatment and Synergistic Rare-Earth Modified NiCrAlY on Bonding Strength of Nanostructured 8YSZ Coatings

Rare earth effect on the microstructure and wear resistance of Ni-based coatings

Effect of rare earth on microstructure and properties of the self-propagating spraying coating

Study on Microstructure and Properties of FeNiCr/Ni Coated Cr_3C_2 Coatings Deposited by High Velocity Arc Spraying

Effect of Nano-Crystallization of High Velocity Oxy-Fuel-Sprayed Amorphous Nicrbsi Alloy on Properties of the Coatings

Mcraly Coating Modified By Rare Earth For High-End Equipment Parts

Rare earth effect on microstructure, mechanical and tribological properties of CoCrW coatings

HRTEM and Nanoindentation Analysis of NiCoCrAlHfYSi and NiCoCrAlTaY Coatings Produced by AC-HVAF and APS

Modification of Thermal Sprayed NiAl Intermetallic Coatings with Rare Earth Elements

Microstructure And Properties Research Of Re-Containing Femncrnialbsi/Cr3c2 Coatings

Effect of Rare Earth on WC-12Co Coatings Prepared by Thermal Spraying

Effect of Powder Structure on Microstructure of the Oxide Scales Formed on Cold-Sprayed Nicraly Coatings

Micro-indentation and erosion properties of thermal sprayed NiAl intermetallic-based alloy coatings

A comparative study on the oxidation behavior of Y-, Hf- and YHf-doped NiCoCrAl alloys: effect of reactive elements

Preparation process, surface properties and mechanistic study of HVAF-sprayed CoCrFeNiMo 0.2 high-entropy alloy coatings

Effect of RE and Chromium on High Temperature Oxidation Property of Iron Base Self-fluxing Alloy Spray-welding Coating

Microstructure Characteristics, Tribology and Nano-Hardness of Plasma Sprayed NiCrRe Coating