Investigation of Chromium Content on Elevated Oxidation Resistance of Iron-based Coating
HE Ding-yong,WANG Xiao-fang,CUI Li,JianMin Jiang,LI Xiao-yan
DOI: https://doi.org/10.3969/j.issn.1001-4381.2009.08.006
2009-01-01
Journal of Materials Engineering
Abstract:Four kinds of high temperature oxidation resistant iron-based coatings were prepared by arc spraying process.Oxidation experiments of these coatings were carried out at 800℃ in air for up to 240h.The morphologies,composition,and phase structures of the oxidation products were investigated using scanning electron microscopy(SEM) and X-ray diffraction analysis(XRD).The results show that the Cr content plays an important role in the oxidation resistance.When the Cr content contained in the coating is more than 40%(mass fraction),a continuous Cr2O3 passivation layer is developed on the surface of the coating,leading to good high temperature oxidation resistance.In the low Cr-containing coating,e.g.,lower than 30%,only a small quantity of spinel structured FeCr2O4 was formed on the surface of the coating,which provides protection to the substrate.However,most of the oxidation products are loose structured Fe2O3,and are easy to spall off,resulting in a poor effect in substrate protection.