Abstract:2.5-D braided high-alumina fabric-reinforced silica matrix composite materials are being developed as functional structural composites with thermal load-bearing capacity for the top thin face sheet of an integrated thermal protection system (TPS). This study seeks to elucidate the mechanical behavior of a 2.5-D braided top face sheet composite material subjected to off-axis compression, while the sandwich TPS is under deflection caused by the bending moment resulting from the temperature gradient in the thickness direction and the aerodynamic pressure on the top face sheet panel. The effective compressive modulus and ultimate strength along the warp direction are significantly lower than those along the weft direction. Both decrease as the off-axis loading angle increases, indicating anisotropy. A nonlinear compressive stress–strain response with extensive damage along the warp yarn direction, while the weft yarn direction exhibits a quasi-linear response with minor damage before fracture. Within the framework of continuum damage mechanics, fiber kinking and transverse inter-fiber cracking of fiber bundles with the linear damage evolution law are all considered simultaneously for the progressive damage model. To account for the interaction between multiple damage mechanisms in the fiber yarn, a joint degradation induced by multiple damage mechanisms is first proposed. The analysis reveals that the anisotropy of failure under compression is primarily due to the warp fiber bundle's much larger undulation than the weft fiber bundle, which causes severe bending-dominated damage. Using the calibrated model, the qualitative effects of material thickness and yarn geometry size on the compressive mechanical properties of materials are analyzed.

Anisotropic Behaviour of Knitted Glass Fibre/Epoxy Composites under Compressive and Shear Loading

Numerical study of the Impact of shear angle, yarn spacing and yarn fiber volume fraction on effective elastic properties of plan-woven composite

Anisotropy characteristics of electrical conductivity and compressive strength of 3D carbon fiber/epoxy angle-interlock woven composites

Off-axial Angle Sensitivity of 3D Orthogonal Woven Composite Failure Behavior Subjected to In-Plane Compressive Loading

Experimental and numerical research of temperature on tensile properties of multiaxial warp‐knitted composites

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric

Anisotropic failure analysis of 2.5-D braided composites under compression

Investigation of anisotropy effects in glass fibre reinforced polymer composites on tensile and shear properties using full field strain measurement and finite element multi-scale techniques

Stiffness properties of triaxially braided glass/epoxy composites

Experimental and Numerical Analysis of the Microstructure and Mechanical Properties of Unidirectional Glass Fiber Reinforced Epoxy Composites

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Mechanical Deformation Mechanisms in Knitted Fabric Composites

In and off- axes mechanical properties of three- dimensional textile reinforced carbon composites

Tensile properties of multilayered biaxial weft knitted fabric reinforced composite material

Anisotropic Effects of Quasi-Isotropic Composites (I) ? Modelling

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Experimental investigation on in-plane shear behavior of E-glass fiber/epoxy laminated composites under different strain rates

An Analytical Model for Predicting the Elastic Properties of Triaxially Braided Composites

Analysis of loading modes and rates on the mechanical responses of glass fiber weft-knitted biaxial tubular fabric reinforced composites

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method