Abstract:The relationship among raw materials used, processing conditions, the resulting morphology, and mechanical properties were studied for unidirectional (1D), bidirectional (D) and tridirectional (3D) carbon-carbon composites. Experimental results demonstrated that an increased number of densifications and higher composite densities were associated with elevated strength properties. Generally, tensile and flexural properties were found to be fiber-dominated, whereas compression behavior was mainly affected by density and matrix morphologies. Tensile moduli of 1D and 3D composites were found to be higher than values calculated according to the fibers' content. This was attributed to the contribution of the sheath matrix morphology. Tensile strength levels were significantly lower than expected because of residual stresses resulting from thermal processing. With respect to matrix effects, measured properties indicated that high glass-like carbon fraction resulted in enhanced strength and modulus, both in tension and compression. Microstructure observations indicated that higher matrix packing density contributed to this result. Pitches containing heavy fractions gave rise to increased compression strength, whereas light fraction types of pitches displayed higher tensile strength, because of different matrix morphologies in each case. Atmospheric pressure carbonization of 3D composites resulted in void-containing matrix with almost no sheath morphology. Consequently, the associated mechanical properties were inferior. Distinctively, atmospheric pressure carbonization of 1D and 2D composites is quite effective in sheath morphology formation. Consequently, mechanical properties are only slightly inferior to those of the high-pressure densified composites. Finally, it was observed that graphitization tended to reduce strength and enhance modulus, compared to only carbonized composites. Non-sequentially graphitized 3D composites are disadvantageous, compared with composites graphitized following each densification. The duration of graphitization tended to reduce compression strength with longer processes.

In and off- axes mechanical properties of three- dimensional textile reinforced carbon composites

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

Mechanical performance of composites based on various three-dimensional woven-fibre preforms

Anisotropy characteristics of electrical conductivity and compressive strength of 3D carbon fiber/epoxy angle-interlock woven composites

Multiaxis three-dimensional weaving for composites: A review

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Mechanical properties of a novel Tri-directional carbon-flax-aramid fiber reinforced composite

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Directionally Oriented Reinforcements of Warp-Knitted Fabrics for Composite Preforms

Off-axial Angle Sensitivity of 3D Orthogonal Woven Composite Failure Behavior Subjected to In-Plane Compressive Loading

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Effect on mechanical properties of CFRP composites in different fiber orientations

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

Mechanical behavior of three‐harness twill woven composite plates under tension loading

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Effect of materials and processing on the mechanical properties of C/C composites

Mechanical Testing of 3D Fabric Composites and Their Matrix Material SC-15