Abstract:Residual stresses play detrimental roles in the mechanical performance of lattice-core sandwich panels (LCSPs) via powder bed fusion (PBF), owing to the laser-induced high-temperature gradients. Thus, it is essential to understand the thermo-mechanical behavior of LCSPs during PBF. However, the relation between process settings and the mechanical response of as-printed LCSPs has not been systematically investigated. In this study, an integrated thermo-mechanical modeling is developed to effectively capture the strut stress and deformation of PBF-built LCSPs. The key advance is that the effective thermo-mechanical field within printed LCSPs is first determined based on the homogenization-based differential quadrature method, where the structure-dependent thermophysical and mechanical properties of lattice cores are considered. The effective displacement is used to directly calculate strut stresses through a de-homogenization process. The accuracy of the predicted results is verified by the comparison with the literature. Furthermore, the effect of process parameters, geometrical dimensions, and strut structures on the thermo-mechanical behavior of pyramidal and vertically reinforced pyramid LCSPs is demonstrated. The results show that the strut stress and vertical warpage increase with the higher energy density, length-to-thickness ratio, and vertical strut addition, while decreasing as the inclined angle and environmental temperature enlarge. These findings can offer a guideline for the high-quality printing of LCSPs with desired mechanical performance and dimensional accuracy.

Study on the Residual Stress and Warping of Stiffened Panel Produced by Electron Beam Freeform Fabrication

Design of Vertically Stiffened Steel Plate Walls under Combined Uniaxial Compression and Shear Loads

Numerical Simulation of the Twist Deformation for the Stiffened Panel with Laser Forming

Modeling of Stiffener Integral Panels with Eigenstrain for Laser Peen Forming and Analysis of Deformation Characteristic

The Influence of Welding Mechanical Boundary Condition on the Residual Stress and Distortion of a Stiffened-Panel

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Design and optimization of composite sub-stiffened panels

A Manufacturing Process Simulation of Toughened Cyanate-Ester-Based Composite Structures with Respect to Stress Relaxation

Numerical Investigation of Residual Stress in Thick Titanium Alloy Plate Joined with Electron Beam Welding

Analyses of Effects of Process Parameters on Laser Bending of Stiffened Panels

3D Finite Element Numerical Simulation of Residual Stresses on Electron Beam Welded BT20 Plates

Measurements and computations of welding residual stresses in thick electron beam welded components

Laser forming of the panel with crossed reinforcing bars

Finite element modeling of residual stress of Ti/TiAl multilayer composites prepared by electron beam physical vapor deposition technology

Thermo-mechanical modeling of lattice-core sandwich panels in powder bed fusion

The effects of substrate temperature on the residual stress for EBPVD

Comparative Study of Welding Deformation of a Stiffened Panel under Various Welding Procedures

Spatial Distribution Evolution of Residual Stress and Microstructure in Laser-Peen-Formed Plates

Residual Stress and Deformation in Wire-Feed Electron Beam Additive Manufactured Aluminum Components

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Experimental Research on Fiber Compaction of L-shaped Stiffeners in Stiffened Skins by Autoclave Process