Abstract:Electron beam welding (EBW) is widely used to connect thin-walled high-temperature alloy structures in aeroengines. However, the residual stress and deformation caused by the high-temperature gradients generated during welding would affect the rigidity, dimensional stability, and fatigue resistance of the welded structures. The study reported here used a model combining ellipsoidal and Gaussian rotating body heat sources to undertake a numerical simulation of the temperature and residual stress generated during the EBW process. The model was systematically refined by observing and measuring the molten pool morphology. The error rates for key dimensions determining the molten pool shape were less than 6%. With a microscope-based examination, the energy distribution characteristics were detected by the microstructure analysis of grain type and size in different regions to verify the viability of the heat source model. The residual stress of a butt welding was simulated by the proposed heat source model based on the full consideration of a full-loop thin-walled combustor casing structure and material properties. It was found that the average errors for longitudinal and transverse residual stresses of welded joints and their adjacent areas were 10% and 12%, respectively, by comparing with the experimental results. Simultaneously, the low cycle fatigue life of the welded combustor casing would be decreased by 32% considering the influence of welding residual stress. These conclusions can be used as a basis for studying the integrity of thin-walled welded structures in aeroengines.

Reduction of Residual Stress and Deformation in Electron Beam Welding by Using Multiple Beam Technique

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Influence of Multi-Beam Electron Beam Welding Technique on the Deformation of Ti6Al4V Alloy Sheet

Influence of Multi-Beam Preheating Temperature and Stress on the Buckling Distortion in Electron Beam Welding

Effects of Welding Parameters on Weld Shape and Residual Stresses in Electron Beam Welded Ti2AlNb Alloy Joints

Influence of electron beam welding with multiple beams on stress corrosion properties of AF1410 steel

Residual Stress and Deformation in Wire-Feed Electron Beam Additive Manufactured Aluminum Components

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

Effect of Induction Heat Treatment on Residual Stress Distribution of Components Fabricated by Wire Arc Additive Manufacturing

Review on finite element analysis of welding deformation and residual stress

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Study of multi-pass laser welding deformation of bipolar plates by experiments and simulations

Numerical Simulations of Temperature Fields During Electron Beam Welding Using the Double-Beam Technique

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

Measurements and computations of welding residual stresses in thick electron beam welded components

Controlling welding residual stress and distortion by a hybrid technology of transient thermal tensioning and trailing intensive cooling

Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy

3D Finite Element Numerical Simulation of Residual Stresses on Electron Beam Welded BT20 Plates

Energy Density Distribution and Temperature Closed-Loop Control in Electron Beam Processing