Abstract:The layer-by-layer processing features of laser melting deposited (LMD) TC11 titanium alloy inevitably lead to microstructural inhomogeneity, and the grain morphology associated with micro-orientations induces plastic anisotropy, which causes uneven deformation and further performance deterioration. Understanding the main causes of these characteristics and how to distinguish their relative roles in inducing plastic anisotropy is critical. In this work, a high-efficiency LMD process is developed. Then, the individual factors causing the formation of elongated grains, microstructural inhomogeneity and micro-orientations are isolated to investigate the synergistic and competitive mechanisms of plastic anisotropy for high-efficiency LMD TC11 titanium alloy before and after various heat treatments. Initially, the TC11 titanium alloy is prepared by the LMD technique under high laser power and then heat-treated via three methods of double annealing in the α+β phase zone. Subsequently, the macro- and microscopic morphology, microstructure, and micro-orientations are characterized by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The individual effects of grain shape, α grain boundary (αGB) and micro-orientations on tensile plastic anisotropy are systematically and thoroughly investigated via a hybrid method consisting of experimental and crystal plasticity finite element simulation methods. By introducing a redefined evaluation indicator of dislocation plugging coefficients, elongated grains are found to be the main source affecting the tensile strength in different loading directions. In addition, with increasing primary annealing temperature, the breakage degree of αGB parallel to the building direction (BD) is significantly higher than that perpendicular to the BD, which leads to an increase in tensile strength and elongation. Moreover, the preferred <0 0 0 1> orientation leads to different tensile strengths perpendicular and parallel to the BD, which is caused by the transformation between easy-to-slip and hard-to-slip orientations. The micro-orientations mainly affect the yield strength and elongation, while the tensile strength and elongation are simultaneously controlled by the grain morphology and αGB.

The Anisotropy of Laser Melting Deposition Additive Manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si Titanium Alloy

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

On the texture and mechanical property anisotropy of Ti6Al4V alloy fabricated by powder-bed based laser additive manufacturing

Anisotropic Tensile Behavior of Ti-47Al-2Cr-2Nb Alloy Fabricated by Direct Laser Deposition

Selective Laser Melting of Ti-5Al-2.5Sn Alloy with Isotropic Tensile Properties: the Combined Effect of Densification State, Microstructural Morphology, and Crystallographic Orientation Characteristics

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Synergistic and Competitive Mechanisms of Plastic Anisotropy in High-Efficiency Laser Melting Deposited TC11 Alloy

Multiple Α Sub-Variants and Anisotropic Mechanical Properties of an Additively-Manufactured Ti-6Al-4V Alloy

Controllable Mechanical Anisotropy of Selective Laser Melted Ti6Al4V: A New Perspective into the Effect of Grain Orientations and Primary Grain Structure

Solidification Microstructure and Mechanical Properties of Laser Additive Manufactured Near-α Ti-6Al-3Nb-2Zr-1Mo Titanium Alloy

Microstructure and mechanical properties of laser additive manufactured novel titanium alloy after heat treatment

Hot Tensile Deformation Behavior of Ti-6Al-4V Titanium Alloy Made by Laser Melting Deposition

In-situ investigation on the anisotropic behavior of the additively manufactured dual-phase Ti-6Al-4V alloy

Study of microstructure and compressive strength of a novel Ti-0.75Al-9.5V alloys manufactured by laser deposition melting

Effect of annealing treatment on microstructure and tensile properties of Ti-48Al-2Cr-5Nb alloy fabricated by laser additive manufacturing

Microstructure and Mechanical Property of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy Fabricated by Selective Laser Melting with a Preheated Substrate

Study of superior strength in Ti15Mo alloy manufactured using selective laser melting

Chemical, microstructure, and mechanical property of TiAl alloys produced by high-power direct laser deposition

In situ tensile test of selective laser melted Ti-6.5Al-2Zr-1Mo-1V alloy at different stages of martensite decomposition

Micro-deformation behavior of laser melting deposited multi-gradient TC4/TC11 alloy under tension-tension cyclic loading

The anisotropy of corrosion and passive behavior in selective laser melted Ti-5Al-5Mo-5 V-3Cr-1Zr alloy