Abstract:Abstract According to the report published by the International Energy Agency (IEA), active space cooling and air conditioning systems consume approximately 16% of the building sector’s final electricity consumption and contribute 3.94% of global greenhouse gas emissions. In this regard, the use of low-cost but effective passive solutions, such as organic phase change materials (PCM) on the building envelope, can provide high thermal mass and thus can lower the temperature fluctuation inside the building. In the current study, the potential of PCM-enhanced building envelopes to enhance thermal comfort has been studied. The study has been performed using the conduction finite difference (ConFD) algorithm in EnergyPlus software. A comparative study has been done for a traditional reinforced cement concrete (RCC) reference test room of size (5m x 6m x 3m) and another room of the same size with PCM-enhanced walls for the hot and humid climate zone of Guwahati (latitude 26.1, longitude 91.7), in India. A PCM thickness of 20 mm is used at the external surface of the wall between the red clay burnt brick (120 mm in thickness) and the cement plaster (25mm thick). The PCM used for the study is a biocomposite PCM, named WH-PCM, with a melting point of 31.5°C and thermal conductivity of 0.27 W/mK. The simulation results reveal that the R-value of the external wall of the room with PCM walls has been increased by 84.90% compared to the reference room with the incorporation of WH-PCM, resulting in a mean zone temperature difference of 0.3°C throughout the year. Also, the indoor thermal discomfort hours have been annually reduced by 15.82% with the use of WH-PCM when compared with the reference room. A similar temperature difference trend, which is 1.93°C, is also observed in the single PCM brick experimental result under identical testing conditions as a regular brick of the same size.

Thermal Performance of a New Type of Phase Change Material Room in Summer and Winter

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Simulative optimization on energy saving performance of phase change panels with different phase transition temperatures

Experimental study of the thermal and energy conservation characteristics of combined phase change material (PCM) room in summer

Experimental study of breathable and heterogeneous phase change material (B&H-PCM) wall for all-season thermal performance enhancement

Performance analysis of a novel phase-change wall of wood structure coupled with sky-radiation cooling

Integrating phase change material in building envelopes combined with the earth-to-air heat exchanger for indoor thermal environment regulation

Simulation and designing of PCM wallboard rooms combined with night ventilation

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Performance study of a phase change material Trombe wall system in summer in hot and humid area of China

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Experimental study on the performance of a novel RC-PCM-wall

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Analysis of temperature regulation and heat storage effect of the combined phase change envelope in hot summer and cold winter zone

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

A New Method to Estimate Optimal Phase Change Material Characteristics in A Passive Solar Room

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

An Assessment of Mixed Type PCM-gypsum and Shape-Stabilized PCM Plates in a Building for Passive Solar Heating