Abstract:In high-speed reciprocating wire electrical discharge machine, the dry process can solve the problem of disturbance of flushing to the electrode wire that existed in conventional top and bottom flushing process. However, the surface of the processed part is prone to be burned. A novel dielectric fluid feeding method (moistened wire method) with near-dry process was proposed to improve processing quality. Firstly, the dielectric fluid was poured onto the drum, then the dielectric fluid was packed into the discharge gap by the moistened high-speed running molybdenum wire to form a gas–liquid double-layer dielectric for discharge machining, cooling and cleaning the working material. On this basis, the SiC nanofluids were added in the dielectric fluid to further improve processing quality. The effects of the conventional top and bottom flushing with emulsion, the dry with atmospheric, the moistened wire with emulsion and the moistened wire with emulsion-SiC nanofluids during the finishing process on the kerf width, average cutting speed, surface roughness, surface morphology, and corner accuracy of the Cr12MoV die steel was studied. Compared to the conventional top and bottom flushing process, the processing quality was obviously enhanced by the moistened wire processes, and the Ra values machined by moistened wire with emulsion and emulsion-SiC nanofluid processes were decreased by 39.8% and 45.8%, the inner circle radius was decreased by 4.1% and 4.9%, and outer circle radius was decreased by 3.4% and 10.3%, respectively. Meanwhile, the high cutting speeds were maintained. Compared with the moistened wires with emulsion process, the moistened wires with emulsion-SiC nanofluid process further improved processing quality with lower surface roughness and corner error. The moistened wire process improved the processing quality without sacrificing the cutting speed due to their moderate discharge gaps.

Surface Integrity of Tool Steels Multi-cut by Wire Electrical Discharge Machining

The Surface Integrity in Machining Hardened Steel Skd11 for Die and Mold

A Comparative Study on the Surface Integrity of Single-Step and Multi-Step Sequential Machining in Electric Discharge Machining

Wire-cut electrical discharge machining of duplex stainless steel: a study

Surface Characterization and Tribological Performance Analysis of Electric Discharge Machined Duplex Stainless Steel

Machinability and pulse characteristics of Ti-16Al-14Nb (α/β) alloy in wire-electric discharge machining process: A surface integrity study

Study on surface evenness of super-high-thickness cutting in high-speed wire electrical discharge machining

Influence of Discharge Current on Machined Surfaces by Thermo-Analysis in Finish Cut of WEDM

Impact of copper-titanium carbide tooltip on machined surface integrity during electrical discharge machining of EN31 steel

Experimental study on surface physical behaviour and integrity of polycrystalline diamond (PCD) in micron-scale abrasive flow assisted impulse-discharge machining

Experimental investigation on the surface quality of WEDM machined 20MnCr5 steel for Gear application

Investigation of the Material Removal Mechanism in Electrochemical Discharge Drilling Using a High-Speed Rotating Helical Tool-Electrode

Comparative study on near-dry wire-cut electrical discharge machining process using moistened wire

Investigation on a Novel Surface Microstructure Wire Electrode for Improving Machining Efficiency and Surface Quality in WEDM

Experimental Study of the Surface Quality of Form-Cutting Tools Manufactured via Wire Electrical Discharge Machining Using Different Process Parameters

Optimization of Process Parameters on Surface Integrity in Wire Electrical Discharge Machining of Tungsten Tool YG15

Surface Modification Using Assisting Electrodes in Wire Electrical Discharge Machining for Silicon Wafer Preparation

Helical Surface Creation by Wire Electrical Discharge Machining for Micro Tools

Residual stresses and surface topography investigation of AISI D3 tool steel under of ultrasonic vibration assisted wire-EDM

Study of the Structure and Mechanical Properties after Electrical Discharge Machining with Composite Electrode Tools

Surface integrity of holes machined by electrochemical discharge drilling method