Abstract:In this paper, the stressing state modeling analysis of the residual strain data of H-steel columns reveals three characteristic points that exist during the failure of H-steel columns. Also, the correctness of the stressing state analysis method, residual, and buckling characteristic pairs was verified. First, the experimental residual strains were transformed into generalized strain energy density (GSED) values as the state variables for establishing the stressing state mode and char-acteristic parameters (characteristic pairs). The Mann-Kendall (M-K) criterion is applied to the normalized GSED sum-j curves to reveal the characteristic points P, Q, and U of the evolving stressing state of the H-steel column. Characteristic point P is defined as the elastic-plastic branch point of the H-steel column, characteristic point Q is defined as the failure starting point, and characteristic point U is defined as the progressive failure point. Around the characteristic points of the H-steel columns, the directly modeled stressing state characteristic pairs, residual char-acteristic pairs, and buckling characteristic pairs produce significant mutation characteristics. This phenomenon verifies the correctness of the revealed H-steel column characteristic points and the rationality of this paper's stressing state modeling method. Then, it is proposed that the elastic-plastic branch point P can be directly used as the design reference point, and it is compared with the design point given by Code EN1993-1-5. In conclusion, this paper provides new ideas for analyzing steel structures and opens up the value of residual strain data in structural analysis.

An Analytical Leveling Model of Curvature and Residual Stress Simulation for H-beams

Evolution of Residual Stress Based on Curvature Coupling in Multi-Roll Levelling

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Residual Stress Distributions in Elevator Guide Rail Straightening

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Experimental and numerical investigation on residual stress and deformation of welded I-section curved steel beams

A 2.5-Dimensional Analytical Model of Cold Leveling for Plates with Transverse Wave Defects

Multi-roll Levelling Method for Longitudinal Waves in Metal Sheet Based on a Coupled Curvature Integration Model

Indentation model to obtain residual stress based on deviator stress equivalence and its application

Experimental Study and Modeling of Residual Stresses of Q420 Large-Section Angles

Multi-roll Levelling for Wave Defects of Metal Sheets Based on the Beam-Membrane Method

NUMERICAL SIMULATION OF RESIDUAL STRESS IN COLD-FORMED SIGMA BEAMS

Experimental and Analytical Investigation of Deflection of R-UHPFRC Beams Subjected to Loading–Unloading

Experimental and numerical evaluations of the distribution and effect of roll-forming residual stress on CFS sigma beams

The numerical simulation analysis of the straightening process of the large H-shaped steel

Stressing State Features of H-steel Columns under Cyclic Biaxial Bending Action Revealed from Experimental Residual Strains

A physically consistent 2D residual stress model for approximating 3D effects in welding

Analytical model of hot-rolled strip residual stress and flatness in run-out table cooling

Semi-Analytical Solution Model for Bending Deformation of T-Shaped Aviation Aluminium Alloy Components under Residual Stress

Oblique and Herringbone Buckling Analysis of Steel Strip by Spline Fem

Nonlinear Bending of Shear Deformable Anisotropic Laminated Beams Resting on Two-Parameter Elastic Foundations Based on an Exact Bending Curvature Model