Abstract:Few studies have reported on the flexural behavior of multi–span reinforced concrete (RC) structures strengthened using externally–bonded (EB) systems such as fiber–reinforced polymer (FRP) and fiber–reinforced cementitious matrix (FRCM) systems. This paper introduces a theoretical model that can accurately predict the flexural behavior of such structures with a focus on their rotational capacity (curvature) and their moment redistribution response between critical sections. Unlike the available models, the proposed model accounts for the variation in the structure's stiffness during loading including that of the strengthened section. The model can precisely determine the failure mode, the rotational capacity of the formed plastic hinges and estimate the moment redistribution ratio (MRR) between the critical sections at any applied load. The efficiency of the model was validated against the experimental results of eleven FRCM–strengthened two–span RC beams (including two control beams) previously tested by the authors. A good agreement between the experimental and the theoretical results was obtained with average experimental–to–theoretical ratios of 1.0 and 0.99 for the load carrying–capacity and MRR, respectively. To accurately determine the mid–span deflections of continuous EB–strengthened structures, a new reduction parameter was incorporated in the CSA–A23.3–19 (2019) formulations to account for the variation in stiffness of the strengthened section. The new formulations substantially enhanced the prediction of the deflection capacity of the strengthened structures with an average experimental–to–theoretical ratio of 1.02 versus 1.7 when CSA formulations were used.

Experimental and Analytical Investigation of Deflection of R-UHPFRC Beams Subjected to Loading–Unloading

Evaluation of Main Code Models for Predicting Flexural Load-Bearing Capacity Against Intermediate Crack-Induced Debonding in Frp-Strengthened Rc Beams

Assesment of Main Models for Predicting Debonding Load-Bearing Capacity Against Intermediate Crack-Induced Debonding Failure in Frp-Strengthened Rc Beams

Predicting deflection of retrofitted reinforced concrete beams

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Analytical and computational investigation of the flexural behavior of UHPFRC beams

Analysis Of Flexural Deflection Of Reinforced Uhtcc Beam At Service State

Experimental and analytical study on flexural behavior of corroded RC beams strengthened with CFRP rods and UHPC

Experimental and numerical studies of size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams

A New Analytical Model for Deflection of Concrete Beams Reinforced by BFRP Bars and Steel Fibres under Cyclic Loading

A comprehensive study of prestressed UHPFRC I-beams under cyclic loading

A Physics-Informed and Data-Enhanced Tensile Stress-Strain Model for UHPFRC

Investigation on fracture behaviour of UHPFRC using a mesoscale computational framework

Stressing State Analysis of Reinforced Concrete Beam Strengthened by CFRP Sheet with Anchoring Device

PREDICTION ON FLEXURAL DEFLECTION OF RUHTCC BEAM UNDER SERVICE CONDITION

One-dimensional Fiber Beam-Column Model and Two-Dimensional Fixed Crack Model for Numerical Simulation of UHPC Structures

INVESTIGATION OF THE PERFORMANCE OF RC BEAMS REINFORCED WITH FRP AND ECC MATERIALS

Nonlinear Inverse Analysis for Predicting the Tensile Properties of Strain-Softening and Strain-Hardening UHPFRC

Theoretical investigation of the structural performance of multi–span reinforced concrete beams strengthened with FRCM systems