Abstract:Nanocomposite particles of amorphous carbon-Li4Ti5O12 (C-LTO) and carbon nanotube-Li4Ti5O12 (CNT-LTO) were synthesized by solvothermal method and subsequent high-temperature calcination. X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED) were applied to characterize the phase structure, particle morphology, and the coating structure. XRD analysis, TEM micrographs, HR-TEM images and SAED analysis revealed that both LTO particles exhibited a well-developed spinel nanocrystal structure with average sizes between 20-70 nm. The C-LTO particles exhibited roughly spherical shape coated by an amorphous carbon layer up to 10 nm in thickness. The CNT-LTO samples showed uniform square nanocrystals with edge length around 20 nm and nanoscale graphitic layers covering the surface, revealing the carbon nanotubes interconnection networks among the particle assemblies. Electrochemical studies of lithium insertion/extraction performance are evaluated by the galvanostatic charge/discharge tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Both LTO particles showed the superior initial discharge capacity of more than 200 mAh/g at 1/10C rate. The irreversible capacity of the C-LTO particles at more cycles was due to large polarization resulted from excessive carbon and possible residual precursors. The CNT-LTO particles show larger reversible capacity and enhanced electrochemical Li+ insertion/extraction kinetics at different cycling rates. The comparative structural and electrochemical analyses demonstrated that both nanoscale graphitic covering layers and the CNT interconnection networks increase the electronic conductivity and improve the kinetics rates of lithium insertion/extraction in the CNT-LTO particles.

Nanosized Spinel Li4Ti5O12 Anode Material Prepared by Gel-polymer Method using Furfuryl Alcohol as Polymerizable Solvent

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Nano-Li4Ti5O12 with High Rate Performance Synthesized by a Glycerol Assisted Hydrothermal Method

A Simple Gel Route to Synthesize Nano-Li 4 Ti 5 O 12 As a High-Performance Anode Material for Li-ion Batteries

Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

Synthesis of Nanocrystalline Li[sub 4]Ti[sub 5]O[sub 12] by Chemical Lithiation of Anatase Nanocrystals and Postannealing

Preparation and Characterization of Porous Spherical Li_4Ti_5O_(12)/C Anode Material for Lithium Ion Batteries

Preparation of nanosized Li4Ti5O12 as anode material for lithium-ion batteries via ion-exchange method

Synthesis Of Nanocrystalline Li(4)Ti(5)O(12) By Chemical Lithiation Of Anatase Nanocrystals And Postannealing

Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> hollow nanospheres prepared with colloid carbon spheres as templates for high power Li-ion battery anodes

Improvement of Electrochemical Properties of LiNi0.5Mn1.5O4 Spinel Prepared by Radiated Polymer Gel Method

Synthesis and Characterization of Al-Doped Li4Ti5O12 with Sol Gel Method for Anode Material Lithium Ion Battery

Preparation of LiFePO4 Nanoparticles in Virtue of Triblock Copolymer P123 and Their Application in Li-ion Battery

Synthesis and Electrochemical Performance of Nano-Sized Li4Ti5O12 with Double Surface Modification of Ti(III) and Carbon

Li4Ti5O12 Prepared by a Modified Citric Acid Sol–gel Method for Lithium-Ion Battery

Solvothermal Synthesis and the Electrochemical Property of Nano-sized TiO2 Anode Materials for Lithium-ion Batteries

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Synthesis of Carbon-Coated Li 4 Ti 5 O 12 and Its Electrochemical Performance As Anode Material for Lithium-Ion Battery

High temperature solid-state synthesis and characterization of 5V anode LiNi0.5Mn1.5O4-xFx materials

Preparation and effects of F-doping on electrochemical properties of Li4Ti5O12 as anode material for Li-ion battery

Structural and electrochemical characterization of nanocrystalline LI[Li0.12Ni0.32Mn(0.56)]O2 synthesized by a polymer-pyrolysis route