Abstract:Although numerous efforts have been devoted to the spinal Li4Ti5O12 anode material of lithium-ion batteries (LIBs), controllable synthesis of high-purity Li4Ti5O12 nanoparticles under hydrothermal conditions has not yet been achieved. The current work systematically investigates the relationship between phase compositions of the Li–Ti–O system with the corresponding critical conditions. By determining the phase composition using the Rietveld refinement of XRD patterns, the relationship between key hydrothermal parameters and the resultant purity of Li4Ti5O12 is revealed, and the formation mechanism of Li4Ti5O12 using crystalline TiO2 nanoparticles (Evonik Aeroxide P25, Hombikat 8602, and rutile TiO2) and amorphous hydrous TiO2 spheres (AHTS) as TiO2 precursors in an aqueous LiOH solution is demonstrated accordingly. The hydrothermal process cannot generate Li4Ti5O12 directly, while lithium titanium oxide intermediates (LTOIs), e.g., Li2TiO3 and Li2–xHxTi2O4(OH)2, are obtained upon partial lithiation of crystalline or amorphous TiO2 in the LiOH solution, respectively. Nanostructured TiO2@LTOIs can be formed since the underlying phase transition follows the classic in situ crystallization mechanism, as evidenced by the successful self-template synthesis using AHTS. Li4Ti5O12 is formed by the solid-state reaction between the TiO2 core and the LTOI shell at elevated temperatures (∼700 °C). At optimal conditions, the molar ratio of Li/Ti in all TiO2@LTOIs should be greater than a stoichiometric ratio of 4:5 since the solid-state reaction is found to promote the evaporation of lithium species. The comparative studies for the lithium storage properties of our assembled half- and full-cell LIBs demonstrate that the high phase purity of Li4Ti5O12 enhances the electrochemical performances and that the spherical morphology delivers better cyclic stability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.cgd.1c00727.Literature review on the key parameters for different hydrothermal processes for Li4Ti5O12; SEM image of AHTS; and more XRD and electrochemical characterization for Li4Ti5O12 (PDF)This article has not yet been cited by other publications.

Preparation of nanosized Li4Ti5O12 as anode material for lithium-ion batteries via ion-exchange method

Synthesis Of Nanocrystalline Li(4)Ti(5)O(12) By Chemical Lithiation Of Anatase Nanocrystals And Postannealing

Synthesis of Nanocrystalline Li[sub 4]Ti[sub 5]O[sub 12] by Chemical Lithiation of Anatase Nanocrystals and Postannealing

Hydrothermal Synthesis of Li4Ti5O12/TiO2 Nano-composite As High Performance Anode Material for Li-Ion Batteries

Li4Ti5O12 Prepared by a Modified Citric Acid Sol–gel Method for Lithium-Ion Battery

A Simple Gel Route to Synthesize Nano-Li 4 Ti 5 O 12 As a High-Performance Anode Material for Li-ion Batteries

Nano-Li4Ti5O12 with High Rate Performance Synthesized by a Glycerol Assisted Hydrothermal Method

Synthesis of Carbon-Coated Li 4 Ti 5 O 12 and Its Electrochemical Performance As Anode Material for Lithium-Ion Battery

Preparation and Characterization of Porous Spherical Li_4Ti_5O_(12)/C Anode Material for Lithium Ion Batteries

Preparation and Electrochemical Properties of Ca-doped Li4Ti5O12 As Anode Materials in Lithium-Ion Battery

A New Hydrothermal Synthesis of Spherical Li4ti5o12 Anode Material for Lithium-Ion Secondary Batteries

Unveiling the Formation Mechanism and Phase Purity Control of Nanostructured Li 4 Ti 5 O 12 via a Hydrothermal Process

Hydrothermally Synthesized Li4Ti5O12 Nanotubes Anode Material with Enhanced Li-Ion Battery Performances

Research Progress in Li4Ti5O12 As Anode Material for Li-ion Battery

High Performance Ti3+ Self-Doped Li4Ti5O12 Anode Materials Synthesized by an Electrochemical Method in Molten Salt

Carbon-Coated Nano-Sized Li4ti5o12 Nanoporous Micro-Sphere As Anode Material for High-Rate Lithium-Ion Batteries

Structural and Electrochemical Characteristics of Li4−xAlxTi5O12 As Anode Material for Lithium-Ion Batteries

Hydrothermal Synthesis of Spherical Li4ti5o12 As Anode Material for High Power Lithium-Ion Secondary Battery

Ultrathin Li4Ti5O12 Nanosheets As Anode Materials for Lithium and Sodium Storage.

Preparation of carbon encapsulated Li4Ti5O12 anode material for lithium ion battery through pre-coating method

Synthesis and electrochemical performance of Li4Ti5O12 as anode material for lithium secondary batteries