Abstract:Abstract Concrete repair and rehabilitation prolong the effective service lives of structures and are important topics in the building field worldwide. Epoxy latex-modified cementitious materials have shown promise for a number of applications in building and construction, but the mix design processes remain arbitrary because their pore structures are not well understood. Porosity and pore size distributions are pore structure parameters that have direct effects on the mechanical properties and durability of concrete. In this paper, mercury intrusion porosimetry (MIP) was used to analyze the porosities and pore size distributions of epoxy latex-modified mortars. The effects of the polymer-to-cement ratio on the pore structures of epoxy latex-modified mortars were investigated. Mortars with polymer-to-cement ratios of 0%, 5%, 10%, 15%, and 20% were cured for 7, 28, 60, and 90 days in this study. Images of specimen microstructures were obtained by scanning electron microscopy (SEM), which showed that increases in the amount of epoxy latex added caused the proportion of micropores in the mortar to decrease, while the proportion of macropores and gel pores increased. The pore size distribution of epoxy latex-modified mortar was described with a composite logarithmic model. Relationships between the pore size distribution and the polymer-to-cement ratio and the curing age were obtained. The method described herein might be sufficiently accurate and convenient to evaluate or predict the pore size distribution of an epoxy latex-modified mortar, i.e., by determining the statistical distribution and analyzing the probability. The process for design of the polymer concrete mix ratio will be facilitated by methods that accurately describe the structure of the epoxy latex-modified mortar.

Experimental Study and Analytical Model for Pore Structure of Hydrated Cement Paste

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Fractal Characterization of Pore System Evolution in Cementitious Materials

Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Continuous Characterization of Pore Structure in Cement Paste

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Pore Structure of Cement Pastes Through NAD and MIP Analysis

Characterization of microstructure of cement-based materials by multi-cycle-MIP method

Effect of Curing Conditions on Pore Structure of Cement Based Materials

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Experimental study and analytical model for the pore structure of epoxy latex-modified mortar

Analysis of Pore Structure, Contact Angle and Pore Entrapment of Blended Cement Pastes from Mercury Porosimetry Data

Characterizing Pore Structure of Cement Blend Pastes Using Water Vapor Sorption Analysis

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Fractal Characteristics of Pore Structure of Hardened Cement Paste Prepared by Pressurized Compact Molding

Analysis of Pore Structures and Their Relations with Strength of Hardened Cement Paste

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

New mercury porosimetry method for the measurement of pore size distribution in cement-based materials

Is Early Drying Shrinkage Still Determined by the Mesopore Content? A Case Study of Cement Paste with Minerals

Numerical Simulation of the Effect of Cement Particle Shapes on Capillary Pore Structures in Hardened Cement Pastes