Abstract:Synthetic limestone sand has advantages, such as stable quality and adjustable particle size distribution, and has gradually substituted high-quality natural sand as a fine aggregate in concrete production. The project team has prepared Magnesium Potassium Phosphate Cement (MKPC) mortar by replacing part of the river sand with machine-made limestone sand in equal amounts, which proves that its physical and mechanical properties are obviously better than mortar prepared by whole river sand. However, the research on the impact of machine-made limestone sand on the durability of MKPC mortar has not been carried out. As the repairing material of concrete structures, the frost resistance of MKPC mortar must be evaluated. In this study, the effect of synthetic limestone sand on the frost resistance of Magnesium Potassium Phosphate Cement (MKPC) mortar was investigated by characterizing the strength, mass loss rate, and water absorption of specimens subjected to freeze-thaw cycling. MKPC mortars prepared using solely river sand (M0) or limestone sand (M1) were completely degraded after 225 freezing-thawing cycles in water, whereas the flexural and compressive strengths of MKPC mortar (M2) prepared using both river and synthetic limestone sands was 29.3 and 22.0% of the initial strengths, respectively. The water freeze-thaw resistance of M2 specimens were significantly higher than that of M0 and M1 specimens, and the sulfate freeze-thaw resistance of M1 and M2 were significantly higher than that of M0. The mass loss of MKPC mortar is not more than 0.4% when it is frozen and thawed 225 times in water and 5% Na2SO4 solution, which is far lower than the damage standard of 5%. Based on the favorable composition of the two aggregates, the initial open porosity of M2 was relatively low, owing to the lower water-cement ratio of the mortar at the same flow rate.

The Effect of Limestone Type and Nanosilica on the Durability of Limestone Cement Mortars

Thaumasite form of sulfate attack in ettringite rich-ternary systems: Effects of limestone filler, etching solutions and exposure temperature

Impact of the Thaumasite Sulfate Attack on the Pore Structure and Gas Permeability of Cement Mortar

Thaumasite form of sulfate attack in limestone cement concrete: The effect of cement composition, sand type and exposure temperature

Contradict mechanism of long-term magnesium and sodium sulfate attacks of nano silica-modified cement mortars – Experimental and thermodynamic modeling

Form and mechanism of sulfate attack on cement-based material made of limestone powder at low water-binder ratio under low temperature conditions

Effect of Exposure Conditions on Mortar Subjected to an External Sulfate Attack

Effect of Different Mineral Admixtures on Sulfate Attack to Mortars

Degradation mechanism of cement mortar exposed to combined sulfate–chloride attack under cyclic wetting–drying condition

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Effect of nano materials on cementitious mortar composites exposed to sulphate attack

Chemical–physical–mechanical Stability of MKG Mortars under Sulfate Attacks

Effect of Limestone Powder and Fly Ash on Magnesium Sulfate Resistance of Mortar

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Relationship Between Microscopic Pore Structure and Strength of Cement-Based Materials with Low Water-Binder Ratio Under Sulfate Attack Environment

Influence of Synthetic Limestone Sand on the Frost Resistance of Magnesium Potassium Phosphate Cement Mortar

Influence of Titanium Dioxide Nanoparticles on the Sulfate Attack upon Ordinary Portland Cement and Slag-Blended Mortars

Mechanical characteristics and freezing-thawing degradation mechanism for mortar samples under sodium sulfate solutions attack

The Influence of External Sulfate Attack on the Durability of Reinforced Mortars in the Presence of Calcined River Sediments

Effects of Dolomitic Limestone on the Properties of Magnesium Oxysulfate Cement

Properties evolution of calcium sulfoaluminate cement blended with ground granulated blast furnace slag suffered from sulfate attack