Abstract:Surface texture and titanium nitride (TiN) coating have been established as effective methods for enhancing the tribological property of mechanical friction pairs. This study aims to investigate the tribological performance of dimple-textured surfaces with TiN coating under oil-lubricated conditions using a pin-on-disc wear experiment. Four types of pin samples with various end surfaces were designed, including bare rod samples, TiN-coated samples, textured samples, and TiN-coated/textured samples. The surface texture consists of a series of cylindrical micro-dimples with a diameter of 150 μm and a depth of 40 μm fabricated on the end surface of the pin. TiN coating treatment on the textured surface of the end face was performed by vacuum sputtering coating equipment. The study focuses on measuring and comparatively analyzing the friction coefficient, wear morphology, and binding force of the pin-disc friction pairs among the experiments. Compared with bare rod samples, TiN-coated/textured samples will reduce the friction coefficient (COF) of the pin-on-disc friction pair by at least 20% under oil-lubricated conditions in a 50 N normal contact load. The results indicate that the synergistic effect of dimple surface texture and TiN coating optimizes friction performance and reduces wear, highlighting the novelty of this study. Furthermore, the study identifies the hydrodynamic lubrication effect of the surface morphology formed by the dimple surface texture as a key factor in improving lubrication performance and reducing friction. Additionally, the dimple surface texture enables the mitigation of third body wear due to the wear debris storage function of the micro-dimples. This research provides valuable insights for the design and fabrication of mechanical friction pairs with high wear resistance under oil-lubricated conditions.

Surface Composition–lubrication Design of Al2O3/Ni Laminated Composites—part I: Tribological Synergy Effect of Micro–dimpled Texture and Diamond–like Carbon Films in a Water Environment

Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic

Tribological Properties of Al2O3/Graphite-Al2O3 Laminated Composites under Water Lubrication Conditions

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Effect of Micro-Dimple Geometry on the Tribological Characteristics of Textured Surfaces

Additional Tribological Effect of Laser Surface Texturing and Diamond-Like Carbon Coating for Medium Carbon Steel at Near Room Temperature

Two-step printing Ni3Al/Cr3C2-Ti3SiC2/MoS2 composite films using electrohydrodynamic atomization with a biomimetic shark-skin mask

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Improved Interfacial Adhesion Between TiAlN/DLC Multi-Layered Coatings by Controlling the Morphology Via Bias

Microstructure and Tribological Performance of Self-Lubricating Diamond/tetrahedral Amorphous Carbon Composite Film

Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces

Effect of Micro-Dimple Texture on the Tribological Performance of Brass with Titanium Nitride (TiN) Coating under Oil-Lubricated Conditions

Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

Enhanced Mechanical and Tribological Capabilities of a Silicon Aluminum Alloy with an Electroplated Ni–Co–P/Si3N4 Composite Coating

Tribological Behavior of Diamond Like Carbon Film Sliding Against Cocrmo or Al2o3 in Air and Water Environment

Ni/Si3N4 composite coatings and their water lubrication behaviors

Tribological Properties of Ti6Al4V Titanium Textured Surfaces Created by Laser: Effect of Dimple Density

Fabrication and tribological characterization of laser textured engineering ceramics: Si3N4, SiC and ZrO2

Surface textures fabricated by laser and ultrasonic rolling for improving tribological properties of TiAlSiN coatings

Durable superlubricity of hydrogenated diamond-like carbon film against different friction pairs depending on their interfacial interaction

Surface Texturing for Low Friction Mechanical Components