Abstract:We investigated the fundamental aspects of liquid mixing process inside micro-droplets using a recently developed numerical model (Riaud et al., 2014. Phys. Rev. E 89, 053308). Specifically, a two-phase color-gradient model was applied to simulate the generation of droplets in microchannels, while passive tracers only soluble in the dispersed phase were added into the model to characterize the mixing of the solutes without influence on the macroscopic flow field. After introducing the dilute species redistribution scheme and its implementation, the model was validated extensively. We used this numerical method to study the internal mixing of droplets and slugs moving in microchannels. Some of the major influencing factors such as the moving velocity, shape and dimensions of the micro-droplets were tuned to get a comprehensive characterization of the mixing behavior. Depending on flowing time, two successive mixing mechanisms in plugs/droplets moving in a straight channel were disclosed. Firstly there is a fast unsteady convection-dominated stage, at which the mass transfer in the slugs/droplets is controlled by the recirculation motion. However, it turns out to have some stagnant points where convection is inefficient in moving slugs and droplets. The second mixing mechanism is a slower molecular diffusion. At this stage, the solute gradually escapes from the stagnant regions of the droplet and improves the mixing. We further demonstrated that the slow liquid mixing in the latter stage could be spared by adding baffles in the channel to arbitrarily manipulate the two independent circulation zones so as to avoid the existence of the stagnation points in droplets/slugs.

CFD simulation of mass transfer intensified by chemical reactions in slug flow microchannels

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Mass transfer behavior of liquid-liquid slug flow in circular cross-section microchannel

Mass Transfer Intensification of Slug Flow by Interfacial Deformation at Low Flow Rate in the Microchannels with Periodic Expansion Units

CFD Simulation on Circulation Within the Liquid Slug under Gas-Liquid Taylor Flow in Circular Capillary

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

Numerical Simulation on Hydrodynamics of Liquid-Liquid Slug Flow in Capillary

Hydrodynamics and Mass Transfer Characteristics of Liquid–liquid Slug Flow in Microchannels: the Effects of Temperature, Fluid Properties and Channel Size

Hydrodynamics and Local Mass Transfer Characterization under Gas–liquid–liquid Slug Flow in a Rectangular Microchannel

Mass Transfer Phenomena Of Partially Miscible Liquids Under Liquid-Liquid Slug Flow In A Circular Microchannel

Slug Formation Analysis of Liquid–Liquid Two-Phase Flow in T-Junction Microchannels

Effects of a Dynamic Injection Flow Rate on Slug Generation in a Cross-Junction Square Microchannel

Liquid-Liquid Two-Phase Flow Patterns and Mass Transfer Characteristics in a Circular Microchannel

A Colorimetric Technique to Characterize Mass Transfer During Liquid-Liquid Slug Flow in Circular Capillaries

Gas–liquid–liquid Slug Flow and Mass Transfer in Hydrophilic and Hydrophobic Microreactors

Mass transfer characteristic in the formation stage of gas-liquid segmented flow in microchannel

Simulation of liquid mixing inside micro-droplets by a lattice Boltzmann method

Investigation of Mass-Transfer Performance for Biodiesel Reaction in Microchannel Reactor using Volume-of-Fluid with Species-Transport Model

Simulation of the hydrodynamics and mass transfer in a falling film wavy microchannel

Simulation of single-phase reacting flows in micro-channel reactors by Lattice Boltzmann method

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor