Abstract:This paper presents a study of the characteristic effects of the physicochemical properties of microcrystalline cellulose and a series of biocarbon samples produced from this raw material through thermal conversion at temperatures ranging from 200 °C to 850 °C. Structural studies revealed that the biocarbon samples produced from cellulose had a relatively low degree of graphitization of the carbon and an isometric shape of the carbon particles. Based on thermal investigations using the differential thermal analysis/differential scanning calorimeter method, obtaining fully formed biocarbon samples from cellulose feedstock was possible at about 400 °C. The highest direct carbon solid oxide fuel cell (DC-SOFC) performance was found for biochar samples obtained via thermal treatment at 400-600 °C. The pyrolytic gases from cellulose decomposition had a considerable impact on the achieved current density and power density of the DC-SOFCs supplied by pure cellulose samples or biochars derived from cellulose feedstock at a lower temperature range of 200-400 °C. For the DC-SOFCs supplied by biochars synthesised at higher temperatures of 600-850 °C, the "shuttle delivery mechanism" had a substantial effect. The impact of the carbon oxide concentration in the anode or carbon bed was important for the performance of the DC-SOFCs. Carbon oxide oxidised at the anode to form carbon dioxide, which interacted with the carbon bed to form more carbon oxide. The application of biochar obtained from cellulose alone without an additional catalyst led to moderate electrochemical power output from the DC-SOFCs. The results show that catalysts for the reverse Boudouard reactions occurring in a biocarbon bed are critical to ensuring high performance and stable operation under electrical load, which is crucial for DC-SOFC development.

Study on the preparation of activated carbon for direct carbon fuel cell with oak sawdust

A Comparative Study of Different Carbon Fuels in an Electrolyte-Supported Hybrid Direct Carbon Fuel Cell

Application of Biochar Derived from Different Types of Biomass and Treatment Methods as a Fuel Source for Direct Carbon Fuel Cells

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

In-situ catalytic gasification of kelp-derived biochar as a fuel for direct carbon solid oxide fuel cells

Performance improvement of direct carbon fuel cell by introducing catalytic gasification process

Research and Development of Solid Oxide Direct Carbon Fuel Cell

Experimental investigation of Direct Carbon Fuel Cell fueled by almond shell biochar: Part II. Improvement of cell stability and performance by a three-layer planar configuration

Achieving Direct Electrochemical Oxidation of Carbon below 600oC through a Novel Direct Carbon Fuel Cell

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell

Using Potassium Catalytic Gasification to Improve the Performance of Solid Oxide Direct Carbon Fuel Cells: Experimental Characterization and Elementary Reaction Modeling

Preparation of cathode catalysts for efficient direct lignin fuel cells by nitrogen doping reduction of oxidized graphene with phthalocyanine iron and Kraft lignin

Effect of Contact Type Between Anode and Carbonaceous Fuels on Direct Carbon Fuel Cell Reaction Characteristics

Oaks-derived activated carbon by trace alkali-induced catalytic steam activation for electrochemical capacitor applications

Investigating the Effects of the Physicochemical Properties of Cellulose-Derived Biocarbon on Direct Carbon Solid Oxide Fuel Cell Performance

Experimental and Modeling Study of High Performance Direct Carbon Solid Oxide Fuel Cell with in Situ Catalytic Steam-Carbon Gasification Reaction

Preparation of Pt/C cathode catalyst supported on chestnut-like mesoporous carbon for fuel cell applications

Preparation of Biomass-Based Heteroatom-Doped Porous Carbon and Its Electrochemical Properties

A novel biomass modified brown coal as composite fuel for high performance direct carbon solid oxide fuel cells

Direct methanol fuel cell with enhanced oxygen reduction performance enabled by CoFe alloys embedded into N -doped carbon nanofiber and bamboo-like carbon nanotube