Abstract:Background: Porous carbon materials are promising candidate supports for various applications. In a number of these applications, doping of the carbon framework with heteroatoms provides a facile route to readily tune the carbon properties. The oxygen reduction reaction (ORR), where the reaction can be catalyzed without precious metals is one of the common applications for the heteroatom-doped carbons. Therefore, heteroatom doped catalysts might have a promising potential as a cathode in Microbial fuel cells (MFCs). MFCs have a good potential to produce electricity from biological oxidization of wastes at the anode and chemical reduction at the cathode. To the best of our knowledge, no studies have been yet reported on utilizing Sulfur trioxide pyridine (STP) and CMK-3 for the preparation of (N and S) doped ordered porous carbon materials. The presence of highly ordered mesostructured and the synergistic effect of N and S atoms with specific structures enhance the oxygen adsorption due to improving the electrocatalytic activity. So the optimal catalyst, with significant stability and excellent tolerance of methanol crossover can be a promising candidate for even other storage and conversion devices. Methods: The physico-chemical properties of the prepared samples were determined by Small Angle X-ray Diffraction (SAXRD), N2 sorption-desorption, Transmission Electron Microscopy (TEM), Field Emission Scanning Electron Microscopy (FESEM) and X-ray Photoelectron Spectroscopy (XPS). The prepared samples were further applied for oxygen reduction reaction (ORR) and the optimal cathode was tested with the Microbial Fuel Cell (MFC) system. Furthermore, according to structural analysis, The HRTEM, and SAXRD results confirmed the formation of well-ordered hexagonal (p6mm) arrays of mesopores in the direction of (100). The EDS and XPS approved that N and S were successfully doped into the CMK-3 carbon framework. Results: Among all the studied CMK-3 based catalysts, the catalyst prepared by STP precursor and pyrolysis at 900°C exhibited the highest ORR activity with the onset potential of 1.02 V vs. RHE and 4 electron transfer number per oxygen molecule in 0.1 M KOH. The high catalyst durability and fuel-crossover tolerance led to stable performance of the optimal cathode after 5000 s operation, while the Pt/C cathode-based was considerably degraded. Finally, the MFC system with the optimal cathode displayed 43.9 mW·m-2 peak power density showing even reasonable performance in comparison to a Pt/C 20 wt.%.cathode. Conclusions: The results revealed that the synergistic effect of nitrogen and sulfur co-doped on the carbon substrate structure leads to improvement in catalytic activity. Also, it was clearly observed that the porous structure and order level of the carbon substrate could considerably change the ORR performance.

Preparation of Biomass-Based Heteroatom-Doped Porous Carbon and Its Electrochemical Properties

Palladium nanocrystals immobilized on boron and nitrogen codoped mesoporous carbon spheres as efficient methanol oxidation electrocatalysts

Biomass-derived Co, N and P co-doped 3D porous carbon as an effective electrocatalyst for oxygen reduction reaction

Immobilization of Fe-Doped Ni2P Particles Within Biomass Agarose-Derived Porous N,P-Carbon Nanosheets for Efficient Bifunctional Oxygen Electrocatalysis

Biomass-derived nitrogen self-doped porous activation carbon as an effective bifunctional electrocatalysts

N and S Co-doped Ordered Mesoporous Carbon: An Efficient Electrocatalyst for Oxygen Reduction Reaction in Microbial Fuel Cells

Nitrogen- and Oxygen-Codoped Porous Carbonaceous Foam Templated from High Internal Emulsion As PtRu Catalyst Support for Direct Methanol Fuel Cell

Molecular Engineering toward High‐Crystallinity Yet High‐Surface‐Area Porous Carbon Nanosheets for Enhanced Electrocatalytic Oxygen Reduction

Layered double hydroxides-derived CoNi alloy nanoparticles encapsulated by porous N-doped carbon nanofibers as efficient methanol electrocatalysts for alkaline direct methanol fuel cells

Preparation and electrocatalytic performance of N-doped hierarchical porous carbon loaded with Fe/Fe5C2 nanoparticles

Biomass N/P co‐doped porous carbon plates for electrocatalytic oxygen reduction

Improved oxygen reduction activity on biomass derived carbon catalysts via microbial fermentation pre-treatment and oxygen etching

Nitrogen-doped hierarchical porous carbons derived from biomass for oxygen reduction reaction

NaCl‐Promoted Hierarchically Porous Carbon Self‐Co‐Doped with Iron and Nitrogen for Efficient Oxygen Reduction

Porous Carbon Nanosheets Codoped with Nitrogen and Sulfur for Oxygen Reduction Reaction in Microbial Fuel Cells

Hierarchical Platinum-Nickel@Platinum-Tin Core@Shell Nanowires Achieve Efficient Fuel Cell Catalysis

Facile approach for synthesis of doped carbon electrocatalyst from cellulose nanofibrils toward high-performance metal-free oxygen reduction and hydrogen evolution

UiO66-NH2 as self-sacrificing template for Fe/N-doped hierarchically porous carbon with high electrochemical performance for oxygen reduction in microbial fuel cells

An Advanced Nitrogen‐Doped Graphene/Cobalt‐Embedded Porous Carbon Polyhedron Hybrid for Efficient Catalysis of Oxygen Reduction and Water Splitting

3D honeycombed cobalt, nitrogen co-doped carbon nanosheets via hypersaline-protected pyrolysis towards efficient oxygen reduction

Direct methanol fuel cell with enhanced oxygen reduction performance enabled by CoFe alloys embedded into N -doped carbon nanofiber and bamboo-like carbon nanotube