Abstract:This article constitutes the second installment in a series dedicated to exploring the uncertainties associated with pure rotational Raman–Rayleigh temperature measurement LiDARs in the middle-to-upper atmosphere (20–90 km). It presents uncertainty evaluation methods aimed at addressing the challenge of uncertainty assessment. These methods leverage both the Guide to the Expression of Uncertainty in Measurement (GUM) method and the Monte Carlo method (MCM) to ascertain the uncertainty of air density and temperature derived from LiDAR signals. Within the framework of these evaluation methods, various uncertainty sources are considered, encompassing saturation correction, photon noise, background noise, reference temperature, and two special uncertainty sources: atmospheric transmittance correction in Rayleigh LiDAR and the calibration process in Raman LiDAR. An uncertainty evaluation example in accordance with the proposed evaluation method is provided by employing raw signals from full-chain simulation system introduced in another series paper. In this example, we compare the evaluation results of the GUM method with those derived from the MCM. Our findings reveal consistent trends in different uncertainty components between the two methods. In addition, the uncertainty caused by atmospheric transmittance correction is involved with detailed considerations of correlation and iterative methods. The uncertainty resulting from the calibration process in Raman LiDAR, attributed to its nonlinear characteristics, can only be evaluated using the MCM. These findings affirm the applicability of the proposed uncertainty evaluation methods of pure rotational Raman–Rayleigh LiDAR. This research enhances our understanding of the sources of uncertainty in LiDAR systems and provides a convenient approach for evaluating the data quality of temperature LiDAR.

Uncertainty Analysis of a Pavement Reflectance Measurement System Based on a Gonio-Photometer

Display Measurement Using Imaging Color Luminance Meter and Its Uncertainty

Uncertainty Analysis of Dynamic Goniometer Based on Fiber Optic Gyroscope

Measurement System for Reflection Property of Wet Road Surface

Experiment Measurement and Research of Bidirectional Reflectance Distribution for Cement and Asphalt Surface

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

A Measurement System for the Roughness of Ultra Smooth Surface with Large Aperture

A Metrological of Laser Pavement 3D Measurement Equipment

Uncertainty analysis in the spectroradiometric measurement for the color of LEDs

Portable Instrument To Measure The Average Luminance Coefficient Of A Road Surface

Life cycle assessment of greenhouse gas emissions with uncertainty analysis: A case study of asphaltic pavement in China

Design of Spectrophotometer for Measuring Polarized Transmittance and Reflectance at Different Temperature

Uncertainty in the Temperature Measurement System Using Thermocouples

Estimation of the Uncertainty of Mmw Six-Port Reflectometer

Development and verification of integrated photoelectric system for noncontact detection of pavement ponding and freezing

Study on Calculation of IRI Based on Power Spectral Density of Pavement Surface Roughness

Uncertainty of Pure Rotational Raman–Rayleigh LiDAR for Temperature Measurement in Middle-to-Upper Atmosphere: Evaluation Method

Uncertainty Evaluation of an In-Flight Absolute Radiometric Calibration Using a Statistical Monte Carlo Method

Error and Accuracy Analysis on Road Spectra Measurement System

Low cost ultrasonic roughometer for pavement roughness measurement

Uncertainty Analysis of Spectral Emissivity Measurement Method