Abstract:The present paper introduces the stray light and bandpass correction methods for spectrometers. The line spread function of spectrometer is characterized by a He-Ne laser. Assuming that the spectrometer is a wavelength invariable system, the stray light distribution matrix is constructed by the derived line spread functions. The stray light correction matrix is then derived by matrix conversion from the stray light distribution matrix. The measured signals of the spectrometer are finally multiplied by the stray light correction matrix to correct the stray light errors. The bandpass functions of the spectrometer are characterized in three different wavelength ranges, respectively. And then three groups of bandpass correction coefficients are calculated accordingly. The calculation is divided into several steps. Given the measurement results at the target wavelength position and the ones on the neighbor bandwidths, the bandpass correction results are obtained by weight averaging of them. The bandpass correction coefficients are used as the weights. The two correction methods are applied to a multi-channel fast spectrometer to measure LEDs of different color. The results show that the stray light and the bandpass errors can be corrected effectively. The chromaticity coordinates of the LEDs are corrected by (-0.003, 0.007) for the maximum. Furthermore, the method introduced in this paper can reduce the application cost, simplify the calculation under a reasonable precision, and make the application of the correction easier.

Uncertainty analysis in the spectroradiometric measurement for the color of LEDs

Measurement of Luminous Flux of Blue LEDs Using Spectral-Correction-Integral-Photometry Method

Stray light errors in spectral colour measurement and two rejection methods

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Display Measurement Using Imaging Color Luminance Meter and Its Uncertainty

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Spectrum measurement for LED-based spectrum-tunable source

Uncertainty Analysis of Spectral Emissivity Measurement Method

Uncertainty analysis of spectral flux measurement using Monte Carlo Simulation

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Uncertainty Analysis in Measurement for Led Junction Temperature and Thermal Resistance

Etendue analysis and measurement of light source with elliptical reflector.

Measurement of Led Spatial Intensity Distribution Using Imaging

Uncertainty Analysis in Lifetime Measurement for White Light Emitting Diodes

Assessment of the uncertainty for the measurement of photobiological safety of LED lighting products

Study on a Spectrophotometer System for Measuring LED's Photometric Parameters

Discussion about problems in measuring photometric and colorimetric parameters of LED

The Application of Fiber Spectrometer in Luminous Flux Determination of LED

Study on Methodology of LED's Luminous Flux Measurement with Integrating Sphere

Measuring the Uncertainty of Colour Matching

Assessment of LED’s Radiation Safety