Abstract:Purpose Existing calibration methods mainly focus on the camera laser-plane calibration of a single laser-line length, which is not convenient and cannot guarantee the consistency of the results when several three-dimensional (3D) scanners are involved. Thus, this study aims to provide a unified step for different laser-line length calibration requirements for laser profile measurement (LPM) systems. Design/methodology/approach 3D LPM is the process of converting physical objects into 3D digital models, wherein camera laser-plane calibration is critical for ensuring system precision. However, conventional calibration methods for 3D LPM typically use a calibration target to calibrate the system for a single laser-line length, which needs multiple calibration patterns and makes the procedure complicated. In this paper, a unified calibration method was proposed to automatically calibrate the camera laser-plane parameters for the LPM systems with different laser-line lengths. The authors designed an elaborate planar calibration target with different-sized rings that mounted on a motorized linear platform to calculate the laser-plane parameters of the LPM systems. Then, the camera coordinates of the control points are obtained using the intersection line between the laser line and the planar target. With a new proposed error correction model, the errors caused by hardware assembly can be corrected. To validate the proposed method, three LPM devices with different laser-line lengths are used to verify the proposed system. Experimental results show that the proposed method can calibrate the LPM systems with different laser-line lengths conveniently with standard steps. Findings The repeatability and accuracy of the proposed calibration prototypes were evaluated with high-precision workpieces. The experiments have shown that the proposed method is highly adaptive and can automatically calibrate the LPM system with different laser-line lengths with high accuracy. Research limitations/implications In the repeatability experiments, there were errors in the measured heights of the test workpieces, and this is because the laser emitter had the best working distance and laser-line length. Practical implications By using this proposed method and device, the calibration of the 3D scanning laser device can be done in an automatic way. Social implications The calibration efficiency of a laser camera device is increased. Originality/value The authors proposed a unified calibration method for LPM systems with different laser-line lengths that consist of a motorized linear joint and a calibration target with elaborately designed ring patterns; the authors realized the automatic parameter calibration.

A Metrological of Laser Pavement 3D Measurement Equipment

Development of a Method for Assessing Metrological Traceability in 3D Pavement Texture Measurements

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Use of Distributed Fiber Optic Sensors for the Monitoring of an Accelerated Pavement Test

Improved Laboratory Laser Scanning Setup and Test Procedure for 3-D Pavement Texture Measurement

Assessing Surface Texture Features of Asphalt Pavement Based on Three-Dimensional Laser Scanning Technology

Measurement of pavement rutting trajectories on two-lane highway using the 3D line scanning laser system

A real-time 3D scanning system for pavement distortion inspection

Real Time Measurement of Subgrade Settlement in High Speed Railways with a Resolution of 0.25 mm Using a Laser Imaging Method

A review on pavement distress and structural defects detection and quantification technologies using imaging approaches

A New Data Preprocessing Method for 3D Reconstruction of Pavement

Analysis of Road Surface Texture for Asphalt Pavement Adhesion Assessment Using 3D Laser Technology

Pavement Crack Detection Based on Mobile Laser Scanning Data

Improved 3D Pavement Texture Reconstruction Method Based on Interference Fringe via Optimizing the Post-Processing Method

Pavement roughness measurement based on structure light

Effect of 3D Laser Point Spacing on Cement Concrete Crack Width Measurement

Development of Three-Dimensional Pavement Texture Measurement Technique Using Surface Structured Light Projection

3D laser scanning for monitoring the quality of surface in agricultural sector

A Rut Measuring Method Based on Laser Triangulation with Single Camera

A Unified Calibration Method of 3D Laser Profile Measurement with Different of Laser-Line Lengths

Pavement 3D Data Denoising Algorithm Based on Cell Meshing Ellipsoid Detection