Abstract:Cellular materials exhibit two key properties: structures and mechanisms. This allows for the design of structures using cellular materials while effectively controlling both stiffness and flexibility, based on the connectivity of the struts. This study aims to explore the in-plane flexible properties of cellular materials dominated by bending under macroscopic deformation. Additionally, it seeks to establish a method for designing a passive morphing airfoil with flexible cellular cores. The investigation focuses on airfoils featuring re-entrant and S-shaped cellular cores, analyzing their behavior under static loads by examining the deformation of the cellular cores subjected to aerostatic loads. In the context of the airfoil's deformation with flexible cellular cores under aerostatic loading, shear emerges as the predominant deformation mode for the cores of the airfoil. Wings of conventional aircraft are optimized for only a few conditions, not for the entire flight envelope. Therefore, it is necessary to develop the morphing airfoil with smart structures for the next generation of excellent aircraft. In this project, this was made possible using, re-entrant and S-shaped auxetic structures as a member of the meta- material family, with negative Poisson's ratio to enable an effortless passive morphing mechanism as it has high flexibility along in-plane direction (chord-wise). The 3D CAD Models of Re-entrant and S-shaped auxetic airframes were designed and analyzed. Initially, Static Structural analysis is performed on both airframes to observe the structure’s behavior, and design modification and optimization are performed in different iterations. With a reduction in maximum equivalent stress by 20%, the Re-entrant airframe exhibits lower stress and hence more flexibility. The wings were modeled with a span of 1m using auxetic airframes, air pressure was generated using CFD analysis with MACH 0.45. Finally, the fluid-structure interaction was done by importing the air pressure and performing static structural analysis for the structural performance of wings using auxetic airframes. It was found that Re-entrant auxetic wing showed an increase of 9.99% in load carrying capacity, accompanied by a decrease of 389 grams of weight when compared to S-shaped auxetic wing. Considering the deformation of the airframe with flexible cellular cores under a load, the re-entrant honeycomb core shows the highest flexibility in shear and causes lower stress than the S-auxetic cores. This implies that the re-entrant honeycomb core has the potential for passive morphing.

A Bio-Inspired, Active Morphing Skin for Camber Morphing Structures

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

Research on Large-Deformation Trapezoidal Skin Structure of Morphing Wings

On the Vein-Stiffening Membrane Structure of a Dragonfly Hind Wing

Aeroelastic model and analysis of an active camber morphing wing

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Innovative Skin Structures: Synthesis, Void Analysis, and Hysteresis Modeling of Zero Poisson's Ratio Skin for Span Morphing Wing

(2015). Fluid–Structure Interaction Analysis of the Fish Bone Active Camber Mechanism. Journal of Aircraft , 52 (1), 307-319.

Fluid-structure interaction simulation for multi-body flexible morphing structures

Experimental Study of Flexible Skin Designs Between a Moving Wing Segment and a Fixed Wing Part on a Full Scale Demonstrator

Design and Shear Analysis of an Angled Morphing Wing Skin Module

Investigation on the mechanical properties of topologically optimized cellular structures for sandwiched morphing skins

Autonomous Material Composite Morphing Wing

Design of deployable bistable structures for morphing skin and its structural optimization

In-plane Corrugated Cosine Honeycomb for 1D Morphing Skin and Its Application on Variable Camber Wing

Multi-layered morphing soft structure with high-performance embedded electrothermal artificial muscles along with touch and temperature sensors

Aircraft Wing Morphing Using Auxetic Structures

On Stability Optimization of the Deployable Bistable Compliant Structures Mounted in the Morphing Skin: Method and Implementation

Design and analysis of flexible skin based on zero Poisson's ratio hybrid honeycomb

Analysis of Bio-inspired Fishbone Based Corrugated Rib for Adaptive Camber Morphing