Abstract:Abstract Commercial aircraft today require efficient high-lift and control systems on the wings to reduce the drag in flight or decrease the take-off and landing speeds. Morphing mechanisms are one approach for improved high-lift systems. In most cases the objective function is an increased lift to drag ratio or the noise reduction. On closer examination control systems as well as morphing mechanisms are located in a certain wing segment. The transition between a moving wing part and the fixed wing is a step, which creates additional vortices. This segments the wing in span-wise direction and reduces the efficiency. A flexible skin between a moving and a fixed wing parts smooths the contour and minimize the efficiency reduction of the wing. A full scale demonstrator of a wing segment was manufactured with two flexible skin designs. The first subcomponent connects a morphing leading edge with a rib of the wing over a span of one meter. The skin is a material mix of ethylene-propylene-diene monomer (EPDM) rubber and fiberglass-reinforced plastic. The rubber is the basis of the skin and the glass-fiber is added as local skin stiffeners in the form of strips in chord-wise direction. The second subcomponent blends the aileron with a rib of the wing in a triangular design. The connection of three different hinges realizes a morphing triangle, which is loaded in an in-plane shear only state of stress in each aileron position. The core of the triangle is a 3D printed structure, which is free in shear. The covering skin is a combination of EPDM with carbon fibers oriented in +/−30° direction to obtain shear compliance and to resist the loads on the triangle. The deformation of each concept is identified at the demonstrator. Therefore, an optical measurement system scans the surface in the initial and deflected state. The required deformation precision of the concepts differs due to their design. The contour at the leading edge requires a certain shape over the span. The analysis of the skin buckling is one requirement at the transition triangle during the aileron motion. The experimental results show a smooth transition contour at the leading edge and no buckling effects at the triangle. The results can be used for the validation of simulation models. Furthermore, both skin concepts cover the gap between a moving wing segment and a fixed wing part. The elimination of steps in span-wise direction can improve the aero-acoustic behavior along the wing for future aircraft.

Design of deployable bistable structures for morphing skin and its structural optimization

On Stability Optimization of the Deployable Bistable Compliant Structures Mounted in the Morphing Skin: Method and Implementation

Research on Large-Deformation Trapezoidal Skin Structure of Morphing Wings

Designing Multi-Stable Structures with Enhanced Designability and Deformability by Introducing Transition Elements

Design, kinematic and fluid-structure interaction analysis of a morphing wing

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Kinematic Analysis and Model Fabrication of a Space Deployable Optical Baffle

Synthesis and Static Analysis of the Deployable Frame for A Morphing Wing

Deployable Membrane Structure Based on the Bennett Linkage

Investigation on the mechanical properties of topologically optimized cellular structures for sandwiched morphing skins

Design and research of a new multi-loop closed-chain morphing wing mechanism

Metamorphs: Bistable Planar Structures

Design Of Morphing Wing Leading Edge With Compliant Mechanism

Design and Performance Analysis of Morphing Nose Cone Driven by a Novel Bionic Parallel Mechanism for Aerospace Vehicle

Design and applications of morphing aircraft and their structures

Space deployable bistable composite structures with C-cross section based on machine learning and multi-objective optimization

A tensegrity-based morphing module for assembling various deployable structures

Design and Mechanical Analysis of Bionic Foldable Beetle Wings

Customized deformation behavior of morphing wing through reversibly assembled multi-stable metamaterials

Design of Compliant Mechanism-Based Variable Camber Morphing Wing with Nonlinear Large Deformation

Experimental Study of Flexible Skin Designs Between a Moving Wing Segment and a Fixed Wing Part on a Full Scale Demonstrator