Abstract:Abstract Commercial aircraft today require efficient high-lift and control systems on the wings to reduce the drag in flight or decrease the take-off and landing speeds. Morphing mechanisms are one approach for improved high-lift systems. In most cases the objective function is an increased lift to drag ratio or the noise reduction. On closer examination control systems as well as morphing mechanisms are located in a certain wing segment. The transition between a moving wing part and the fixed wing is a step, which creates additional vortices. This segments the wing in span-wise direction and reduces the efficiency. A flexible skin between a moving and a fixed wing parts smooths the contour and minimize the efficiency reduction of the wing. A full scale demonstrator of a wing segment was manufactured with two flexible skin designs. The first subcomponent connects a morphing leading edge with a rib of the wing over a span of one meter. The skin is a material mix of ethylene-propylene-diene monomer (EPDM) rubber and fiberglass-reinforced plastic. The rubber is the basis of the skin and the glass-fiber is added as local skin stiffeners in the form of strips in chord-wise direction. The second subcomponent blends the aileron with a rib of the wing in a triangular design. The connection of three different hinges realizes a morphing triangle, which is loaded in an in-plane shear only state of stress in each aileron position. The core of the triangle is a 3D printed structure, which is free in shear. The covering skin is a combination of EPDM with carbon fibers oriented in +/−30° direction to obtain shear compliance and to resist the loads on the triangle. The deformation of each concept is identified at the demonstrator. Therefore, an optical measurement system scans the surface in the initial and deflected state. The required deformation precision of the concepts differs due to their design. The contour at the leading edge requires a certain shape over the span. The analysis of the skin buckling is one requirement at the transition triangle during the aileron motion. The experimental results show a smooth transition contour at the leading edge and no buckling effects at the triangle. The results can be used for the validation of simulation models. Furthermore, both skin concepts cover the gap between a moving wing segment and a fixed wing part. The elimination of steps in span-wise direction can improve the aero-acoustic behavior along the wing for future aircraft.

On Stability Optimization of the Deployable Bistable Compliant Structures Mounted in the Morphing Skin: Method and Implementation

Design of deployable bistable structures for morphing skin and its structural optimization

Research on Large-Deformation Trapezoidal Skin Structure of Morphing Wings

Kinematic Analysis and Model Fabrication of a Space Deployable Optical Baffle

Designing Multi-Stable Structures with Enhanced Designability and Deformability by Introducing Transition Elements

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Investigation on the mechanical properties of topologically optimized cellular structures for sandwiched morphing skins

Space deployable bistable composite structures with C-cross section based on machine learning and multi-objective optimization

Experimental Investigations on Structural Improvement of Morphing Mechanism for Nose Cone of Aerospace Vehicle Adopting a Bionic Redundant Constraint Strategy

Synthesis and Static Analysis of the Deployable Frame for A Morphing Wing

Computational Design of Skinned Quad-Robots

Design and Performance Analysis of Morphing Nose Cone Driven by a Novel Bionic Parallel Mechanism for Aerospace Vehicle

Innovative Skin Structures: Synthesis, Void Analysis, and Hysteresis Modeling of Zero Poisson's Ratio Skin for Span Morphing Wing

Design and analysis of flexible skin based on zero Poisson's ratio hybrid honeycomb

Stable Characteristics Optimization of Anti-Symmetric Cylindrical Shell with Laminated Carbon Fiber Composite

Design of Flexible Skin for Target Displacements Based on Meso-Structures

Design and Analysis of a Deployment Mechanism with Clearance Compensation for High Stiffness Missile Wings

Experimental Study of Flexible Skin Designs Between a Moving Wing Segment and a Fixed Wing Part on a Full Scale Demonstrator

Mechanical behavior of composite bistable shell structure and surrogate-based optimal design

Design of a Morphing Skin with Shape Memory Alloy Based on Equivalent Thermal Stress Approach