Abstract:Thermal quenching is one of the most critical challenges for the application of materials under high temperatures. Particularly, BaMgAl10O17:Eu2+ (BAM) has been well considered the preferred blue-emitting phosphor in tricolor fluorescent lamps, plasma display panels (PDP), and many other lighting and display devices due to its excellent luminescence efficiency and satisfactory chromaticity. However, its wide application range is still constrained by two major problems. Firstly, the synthesis temperature for BAM is too high. Commercial BAM materials are typically prepared with high-temperature solid-phase methods over 1550 degrees Ctemperatures. Secondly, co-solvent, which is added during the synthetic process to dissolve the solid phases, is prone to thermal deterioration. To tackle these problems, we propose the cationic substitution method combined with co-solvent assisted sintering to improve the thermal stability of BAM. In the end, we obtained a novel BAM material with a comparably lower synthesis temperature and satisfactory thermal stability. In our work, the thermal stability of BAM synthesized with 5% boric acid substituted by 0.08 mol Ca2+ was significantly higher compared with that synthesized without calcium substitution. Additionally, the activation energies (Delta E) of Ba0.92Ca0.08MgAl10O17: Eu2+ and Ba0.92Sr0.08MgAl10O17:Eu2+ were calculated to be approximately 0.26 eV and 0.35 eV, respectively, indicating that the BAM substituted with Sr2+ is more thermally stable.

High Dispersibility and Enhanced Luminescence Properties of BaMgAl10O17:Eu2+ Phosphors Derived from Molten Salt Synthesis

BaMgAl10O17:Eu2+ Mn2+ Blue-Green Phosphor for White Light Emitting Diodes

Luminescent properties of SrMgAl10 O17∶Eu2+,Mn2+ high-efficiency phosphor prepared via the sol-gel combustion method

Synthesis and luminous characteristics of Ba2MgSi2-xAlxO7: 0.1Eu2+, 0.1Mn2+ phosphor for WLED

Photoluminescence Properties of BaMgAl10O17:Eu2+ Phosphor Prepared by the Flux Method

Luminescence and Morphology of BaMgAl10O17:Eu2+ Phosphors Prepared from Different Phases of Al2O3

High Thermal Stability and Photoluminescence of Si-N-Codoped BaMgAl<sub>10</sub>O<sub>17</sub>:Eu<sup>2+</sup>Phosphors

Optimization of BaMgAl 10 O 17 :Eu 2+ Phosphors by the Substitution of Si-N Bonds for Al-O Bonds

Luminescence of Ba 0.85 MgAl 10 O 16.94 :Eu 2+ 0.09 with Different Fluxes

Preparation and Luminescent Properties of BAM Blue Phosphor Forpdp and CCFL

Luminescence of Ba0.85MgAl10O16.94 : EU0.092+ with different fluxes

Luminescence of Bax−0.05MgAl10O16+x: Eu2+0.05 with Different Ba2+ Content

Luminescence of Ba0.85MgAl10O16.94:Eu 0.09 2+ with different fluxes

Co-solvent-assisted Sintering and Thermal Stability Investment of BaMgAl10O17:Eu2+ by Cationic Substitution

Micro-spherical MAl2O4: Eu2+ (m=ca; Sr) Phosphors: Fast Sol-Gel Route to Monodisperse Size Distribution and Monoclinic Lattice Structure to High Efficiency

Enhancing the Emission Intensity and Decreasing the Full Widths at Half Maximum of Ba3Si6O12N2:Eu(2+) by Mg(2+) Doping.

Synthesis and Characterization of BaMgAl10O17:Eu Phosphors Derived by Sol–gel Processing

Synthesis, structure, and luminescence properties of SrSiAl<sub>2</sub>O<sub>3</sub>N<sub>2</sub>:Eu<sup>2+</sup> phosphors for light-emitting devices and field emission displays

Luminescent Properties of the BaMgAl10O17:Eu2+,M3+ (M = Nd, Er) Phosphor in the VUV Region

Photoluminescent Properties of Eu-doped MAl2Si2O8 Aluminosilicates Phosphors

Emission of BaMgAl_(10)O_(17):Eu~(2+) with High Concentration of Activator