Abstract:A yellowish‐green emitting phosphor Ba3YAl2O7.5:Eu2+ was synthesized by a solid‐state method. The crystal structure, luminescence, concentration quenching, fluorescence decay, and thermal quenching properties were systematically investigated. Under blue light (440 nm) excitation, Ba3YAl2O7.5:Eu2+ phosphors exhibit a yellowish‐green emission peaking at 550 nm with a full width at half maximum ∼ 69 nm, and The Commission Internationale de l'Eclairage (CIE) coordinates of Ba3YAl2O7.5:Eu2+ are (0.4064, 0.5811). Structural analysis and Van Uitert equation along with fluorescence lifetime analysis reveal that Eu2+ ions occupy 6‐coordinated Y and 9‐coordinated Ba sites in Ba3YAl2O7.5, and therefore generate two emission sub‐bands at 582 and 548 nm. In addition, Ba3YAl2O7.5:Eu2+ phosphor remaining 43% photoluminescence emission intensity at 125°C with an activation energy of 0.372 eV. Utilizing the title phosphor (Ba3YAl2O7.5:3%Eu2+), commercial red (Ca,Sr)AlSiN3:Eu2+ (CSAlSi:Eu2+) phosphor, and InGaN‐based blue light emitting diode (LED) chip, a proof‐of‐concept warm white LEDs (WLEDs) with a color rendering index of 80.1, CIE chromaticity coordinates of (0.411, 0.381), luminous efficacy of ∼ 22.13 lm/W, and correlated color temperature of ∼ 3288 K is achieved. Thus, Eu2+ activated Ba3YAl2O7.5 phosphors have the potential application in WLEDs pumped by a blue LED chip for solid‐state lighting application.

Luminescence of Ba0.85MgAl10O16.94:Eu 0.09 2+ with different fluxes

Luminescence of Ba 0.85 MgAl 10 O 16.94 :Eu 2+ 0.09 with Different Fluxes

Luminescence of Ba0.85MgAl10O16.94 : EU0.092+ with different fluxes

Luminescence of Bax−0.05MgAl10O16+x: Eu2+0.05 with Different Ba2+ Content

BaMgAl10O17:Eu2+ Mn2+ Blue-Green Phosphor for White Light Emitting Diodes

Preparation and Luminescent Properties of BAM Blue Phosphor Forpdp and CCFL

Synthesis and luminous characteristics of Ba2MgSi2-xAlxO7: 0.1Eu2+, 0.1Mn2+ phosphor for WLED

Synthesis and luminous characteristics of Ba 3 CaSi 2-x Al x O 8 :Eu, Mn phosphor for white LED

Luminescent Properties of the BaMgAl10O17:Eu2+,M3+ (M = Nd, Er) Phosphor in the VUV Region

Luminescent properties of SrMgAl10 O17∶Eu2+,Mn2+ high-efficiency phosphor prepared via the sol-gel combustion method

Enhancing the Emission Intensity and Decreasing the Full Widths at Half Maximum of Ba3Si6O12N2:Eu(2+) by Mg(2+) Doping.

Synthesis, structure, and luminescence properties of SrSiAl<sub>2</sub>O<sub>3</sub>N<sub>2</sub>:Eu<sup>2+</sup> phosphors for light-emitting devices and field emission displays

Emission of BaMgAl_(10)O_(17):Eu~(2+) with High Concentration of Activator

Energy Transfer in BaMgAl_(10)O_(17):(Eu~(2+),Mn~(2+) Phosphor

Energy Transfer and Photoluminescence of BaMgAl10O17 Co-Doped with Eu2+ and Mn2+

Cathodoluminescence Properties of Ba3Si6O9N4:Eu2+ Phosphors

Luminescence Enhancement of BaMgSiO4:Eu2+ by Adding Borate As Flux

Microstructure and Luminescence of Surface-Coated Nano-Bamgal10o17:Eu2+ Blue Phosphor

Effect of Er3+ and Nd3+ doping on the luminescent properties of BaMgAl10O17:Eu phosphor

A new yellowish‐green‐emitting phosphor: Eu2+‐doped Ba3YAl2O7.5

Photoluminescence Studies of Eu2+-Yb3+ Co-Doped BaMgAl10O17 Phosphor Synthesized by the Combustion Method