Abstract:In this article, a quantitative measurement of orientation functions for both the polymer matrix and the filler has been carried out, for the first time, in high-density polyethylene (HDPE)/inorganic whisker (SMCW) composite fibers, with aid of polarized Fourier transform infrared (FTIR) spectroscopy. A highly oriented structure was observed in the as-spun fibers, and the orientation functions of both polyethylene and the whisker decreased with the increase of whisker content. During tensile deformation of the fibers, the orientation functions were continuously enhanced as increasing of the strain for the matrix and the filler. However, a fast increase of orientation was found for pure polyethylene fiber and composite fibers with less whisker content, and a slow increase for composite fibers with higher whisker content. Very interestingly, a formation of hybrid shish-kebab structure with whisker acting as shish and polyethylene lamellae as kebab was observed in the as-spun fiber with low loading of whisker (less than 10wt.%), resulting in a strong interfacial interaction between polyethylene and whisker. As a result, the highest tensile strength was observed in this sample even it had a lower orientation compared with that of pure HDPE. For the composite fiber with 10 and 20wt.% whisker, no obvious formation of hybrid shish-kebab was observed, resulting in a poor interfacial interaction and subsequently, lower tensile strength. That result indicates that the tensile strength of the fibers depends not only on the orientations of the polyethylene and the whisker, more importantly, on the interfacial interaction between matrix and the filler. The change of orientations of the composite fibers by adding whisker and the formation of hybrid shish-kebab structure were discussed based on rheological measurement.

Effect of multistage tensile extrusion induced fiber orientation on fracture characteristics of high density polyethylene/short glass fiber composites

Fiber alignment and property direction dependency of FRC extrudate

Influence of Diameter on the Templated Crystallization of Polyethylene/Carbon Material Fiber Composites under Intense Shear Flow.

Shear induced fiber orientation, fiber breakage and matrix molecular orientation in long glass fiber reinforced polypropylene composites

Elongational Rheology of Glass Fiber-Filled Polymer Composites

Fiber Distribution of Long Fiber Reinforced Polyamide and Effect of Fiber Orientation on Mechanical Behavior

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric

Effect of fiber orientation on the failure behavior of a glass-fiber reinforced thermoplastic composite

Shear Enhanced Fiber Orientation and Adhesion in PP/Glass Fiber Composites

EFFECTS OF FIBER LENGTH AND ORIENTATION DISTRIBUTIONS ON THE MECHANICAL PROPERTIES OF SHORT-FIBER-REINFORCED POLYMERS

Effects of Fiber Characteristics on Tensile and Impact Properties of Long Fiber Reinforced High-Density Polyethylene

Combined effect of fiber content and microstructure on the fracture toughness of SGF and SCF reinforced polypropylene composites

Shish‐kebab structure evolution of <scp>HDPE</scp>/<scp>UHMWPE</scp> during hot drawing

Effect of Screw-Axial Vibration on Structure and Properties of Short Glass Fiber Reinforced High-Density Polyethylene Composites

Orientation Effects on the Deformation and Fracture Properties of High‐density Polyethylene/ethylene Vinyl Acetate (HDPE/EVA) Blends

Evaluation Of The Fracture Behaviors Of Multilayered Propylene-Ethylene Copolymer/Polypropylene Homopolymer Composites With The Essential Work Of Fracture

Morphologies And Properties Of Polycarbonate/Polyethylene In Situ Microfibrillar Composites Prepared Through Multistage Stretching Extrusion

The effect of shear on mechanical properties and orientation of HDPE/mica composites obtained via dynamic packing injection molding (DPIM)

Orientation in High-Density Polyethylene/inorganic Whisker Composite Fibers As Studied Via Polarized Fourier Transform Infrared Spectroscopy

Essential Work of Fracture Parameters of in-situ Microfibrillar Poly(ethylene terephthalate)/Polyethylene Blend: Influences of Blend Composition

Large scale formation of various highly oriented structures in polyethylene/polycarbonate microfibril blends subjected to secondary melt flow