Abstract:The proliferation of the Internet of Things (IoT) propels the continuous demand for compact, low-cost, and high-performance multiband filters. This paper introduces a novel low-profile dual-band bandpass filter (BPF) constructed with a back-to-back coupled pair of shielded folded quarter-mode substrate integrated waveguide (SF-QMSIW) multimode cavities. A hybrid structure is obtained by etching a coplanar waveguide (CPW) coupling line in the folded cavity's septum layer. It serves multiple functions: generating an additional resonance, providing a separate coupling mechanism for the upper passband, and offering the flexibility to control the passbands' center frequency ratio. Additionally, the unused second higher-order mode is suppressed by integrating embedded split-ring resonators (ESRRs) with an inter-digital capacitor (IDC) structure into the feed lines. A filter prototype has been fabricated and experimentally tested. The measurements confirmed reliable operation in two passbands having center frequencies 3.6 GHz and 5.8 GHz, and exhibiting 3 dB fractional bandwidths (FBWs) of 6.4% and 5.3%, respectively. Furthermore, the group delay variation within both passbands equals only 0.62 ns and 1.00 ns, respectively. Owing to the second higher-order mode suppression, the filter demonstrated an inter-band rejection exceeding 38 dB, within a compact footprint of 0.71λg2 (with λg being the guided wavelength at the lower passband's center frequency).

A compact dual‐band bandpass filter with high design flexibility using fully isolated coupling paths

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Compact Fully‐canonical Dual‐band Bandpass Filter with Independently Controllable Bandwidths

Dual band bandpass filter using coupled and series capacitors with controllable bandwidths

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Compact and Hybrid Dual-Band Bandpass Filter Using Folded Multimode Resonators and Second-Mode Suppression

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Dual‐band Bandpass Filter Using Stepped‐impedance Stub‐loaded Hexagonal Stepped Impedance Resonator (SIR)

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme

Miniaturized independent controllable dual-band bandpass filter by using transversal signal interference concepts

A novel compact triple-passband filter design based on stepped impedance stub-loaded resonators