Abstract:Metal foam wrapped tube has the advantages of large specific surface area, and thus it has great potential to enhance the condensation heat transfer for marine shell and tube condensers, which have the requirements of "high compactness" and "high reliability" under sloshing conditions. In the present study, the effects of the metal foam pore density and the sloshing conditions on the condensation heat transfer on metal foam wrapped tubes were experimentally investigated. The pore density of metal foam covers the widely used structure ranging from 5 PPI to 40 PPI; the sloshing conditions include six-freedom motions of surging, swaying, heaving, rolling, pitching and yawing; the sloshing displacement ranges from 0 to 120 mm; the sloshing angle ranges from 0 to 12'; and the sloshing frequency ranges from 0 to 0.33 Hz. The experiment results show that the condensation heat transfer coefficients of metal foam wrapped tubes increase firstly and then decrease with the increase of PPI, and the 10 PPI metal foam wrapped tube shows the optimal condensation performance. The rolling motion has significant effect on the condensation heat transfer of metal foam wrapped tube, while the other five sloshing motions have negligible effect on the condensation heat transfer of metal foam wrapped tube. With the increase of rolling angle from 0 to 12 degrees, the condensation heat transfer performance of 10 PPI and 20 PPI metal foam wrapped tube gradually increases and the increase rate of the condensation heat transfer coefficient is up to 12%; while the condensation heat transfer performance of metal foam wrapped tube with 5 PPI increases as the rolling angle is larger than 10 degrees. With the increase of rolling frequency, the condensation heat transfer performance of metal foam wrapped tube decreases, and the decrease rate of the condensation heat transfer coefficient is up to 8%. (C) 2021 Elsevier Ltd. All rights reserved.

Heat Transfer and Pressure Drop Characteristics of Wet Air Flow in Metal Foam under Dehumidifying Conditions

Influence of Pore Density on Heat Transfer and Pressure Drop Characteristics of Wet Air in Hydrophilic Metal Foams

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

Experimental Investigation of Heat and Mass Transfer Characteristics of Moist Air in Metal Foam under Dehumidifying Conditions

Influence of Pore Density and Porosity on the Wet Air Flow in Metal Foam under Different Operation Conditions

Experimental Investigation on Water Drainage Characteristics of Open-Cell Metal Foams with Different Wettabilities

Influence of structure on drainage performance of metal foam

Numerical simulation and experimental validation of heat transfer and pressure drop characteristics in metal foam under wet conditions

Enhanced Convective Heat Transfer In High Porosity Metal Foams

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Effects of Hydrophilic Coating on Air Side Heat Transfer and Friction Characteristics of Wavy Fin and Tube Heat Exchangers under Dehumidifying Conditions

Numerical Model of Dehumidifying Process of Wet Air Flow in Open-Cell Metal Foam

The Effect of Hydrophilic Coating on Airside Performance of Split Fin-and-Tube Heat Exchangers under Wet Conditions

Influence of Surface Modification on the Transient Dehumidification Performance of Fin-and-tube Heat Exchanger

Experimental Investigation on the Pressure Drop of Air Flows Through Aluminum and Nickel-Chromium Metallic Foams for HVAC Applications

Experimental Investigation on Pressure Drop and Heat Transfer in Metal Foam Filled Tubes under Convective Boundary Condition

Experimental Study of Condensation Heat Transfer Characteristics on Metal Foam Wrapped Tubes under Sloshing Conditions

Airside characteristics of heat, mass transfer and pressure drop for heat exchangers of tube-in hydrophilic coating wavy fin under dehumidifying conditions

Research on the Wet Performance and Long-term Characteristics of Microchannel Heat Exchanger with Surface Coating

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Experimental study on heat transfer characteristics of flow on an inclined hot metal plate