Abstract:Condensation of water vapor on metal surfaces has a plethora of engineering applications in the energy sector. This study demonstrates an approach of estimating the condensation heat transfer performance of a hydrophobic copper plate utilizing Artificial Intelligence (AI) techniques. The situation under study is an isothermal vertical cooled plate with an attached thin copper sheet exposed to a water-vapor environment devoid of non-condensable gases. Water was chosen due to its high latent heat of vaporization and its extensive industrial use, while copper was selected because of its high thermal conductivity (385 W/m-K). A thin layer of Teflon coating was applied to the copper surface to render it hydrophobic, allowing dropwise condensation (DwC) to be investigated. The experimental setup featured a glass condensation chamber, which allowed visualization of the condensation phenomena on the condenser; a cold plate attached to a chiller, to hold and cool down the condenser; a vacuum pump to maintain low-pressure conditions; a heat source along with pressure and temperature measurement instrumentation. The condensation setup allows to directly calculate the heat transfer coefficient of dropwise condensation and, at the same time, offers visual access to the condenser. The overall efficiency of the dropwise condensation mechanism depends on many key factors, such as nucleation density and rate, maximum droplet size and efficient condensate drainage. The surface-condensation phenomena can be video-recorded while using the instrumentation to measure the heat-transfer efficiency in real time. Computer Vision algorithms were employed to process the raw video files and generate data on the basic aspects of condensing droplet dynamics (number, diameter, area coverage, etc.). The data was evaluated and cross-compared with the heat-transfer coefficients determined from instrumentation, allowing to consider how the droplet characteristics change with experimental operating conditions. Machine learning algorithms, such as Artificial Neural Network (ANN), Multi-Layer Perceptron (MLP), General Regression Neural Network (GRNN), and one ensemble model, Gradient Boosting Regression (GBR) can help to directly determine the heat transfer performance of a specific surface (with known wettability characteristics) from its condensation characteristics. The hypothesis is explored that the visual characteristics of the condensate droplet dynamics can be used in conjunction with trained machine learning models to forecast the DwC heat transfer efficiency of this system without directly measuring the corresponding variables (e.g., temperatures, flow rate, etc.).

Impact of relative humidity, temperature difference, and surface type on humid air condensation heat transfer

Experimental Investigation of Spray Cooling Performance in Non‐boiling Zone on Rough Superhydrophilic/hydrophobic Surfaces

Substrate thermal conductivity-me diate d droplet dynamics for condensation heat transfer enhancement on honeycomb-like superhydrophobic surfaces

Influence of Surface Modification on the Transient Dehumidification Performance of Fin-and-tube Heat Exchanger

Experimental Study of the Air Side Performance of Fin-and-Tube Heat Exchanger with Different Fin Material in Dehumidifying Conditions

Condensation heat transfer between a vertical superhydrophobic aluminum surface and moist air under natural convection

Effect of Substrate Conductivity on the Transient Thermal Transport of Hygroscopic Droplets during Vapor Absorption

Theoretical and Experimental Study of Condensation Rates on Radiant Cooling Surfaces in Humid Air

Experimental Study of Condensation of Water on Polydimethylsiloxane-Coated Copper Surfaces

Air-side Heat Transfer Characteristics under Wet Conditions at Lower Ambient Pressure of Fin-and-tube Heat Exchanger

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Experimental investigation on convective condensation heat transfer in horizontal 4mm diameter coated tube

Enhanced dropwise condensation on heterogeneously hybrid patterned surfaces

Enhancement of Dropwise Condensation Heat Transfer through a Sprayable Superhydrophobic Coating

Condensation Heat Transfer Experiments of R410A and R32 in Horizontal Smooth and Enhanced Tubes

Comparison Of R410a Condensation Heat Transfer Performance On Three Horizontal Tubes

Condensation Heat Transfer Characteristics On The Outside Of Horizontal Smooth, Herringbone And Enhanced Surface 1eht Tubes

Quantifying Steam Dropwise Condensation Heat Transfer via Experiment, Computer Vision and Machine Learning Algorithms

Experimental Study of Dew Formation on Metal Radiant Panels

Experimental Study of Condensation Heat Transfer and Droplet Dynamics on Multiple Horizontal Copper Tubes with Superhydrophobic Characteristics

Condensation heat transfer and pressure drop characteristics inside smooth and enhanced tubes with R410A and R32