Electrospinning Fabrication, Characterization and Magnetic Properties of Co0.5Ni0.5Fe2O4 Nanofibers
XIANG Jun,CHU Yan-qiu,ZHOU Guang-zhen,GUO Yin-tao,SHEN Xiang-qian
DOI: https://doi.org/10.19476/j.ysxb.1004.0609.2011.08.024
2011-01-01
The Chinese Journal of Nonferrous Metals
Abstract:Co0.5Ni0.5Fe2O4 nanofibers with diameter of 150-400 nm were fabricated by sol-gel method combined with electrospinning technology.The as-prepared fiber samples were characterized by means of TG-DTA,XRD,FTIR,FESEM,TEM and VSM techniques.The results show that the pure resultant products with spinel structure are basically formed after calcining the precursor fibers at 450 ℃ for 2 h.With the increase of the calcination temperature,the fiber diameters decrease and the mean size(D) of Co0.5Ni0.5Fe2O4 grains within the fibers gradually increase.As a result,the fiber surface morphology gradually transforms from a porous structure to a necklace-like structure.The saturation magnetizations(Ms) of the obtained Co0.5Ni0.5Fe2O4 nanofibers monotonously increase from 35.8 A·m2/kg at 450 ℃ to 80.2 A·m2/kg at 1 000 ℃ while the corresponding coercivities(Hc) initially increase and then decrease,and reaches the maximum value at about 550 ℃,which indicates that the single-domain critical size of Co0.5Ni0.5Fe2O4 in the form of nanofibers is around 30 nm.Hc of the nanofibers varies as D0.71 in a D range below the single-domain critical size,which is in good agreement with the result predicted on the basis of the random anisotropy model.In addition,the magnetic properties measured at low temperature(77 K) show the substantial enhancements in both coercivity and remanent magnetization and a relatively obvious reduction in saturation magnetization compared to the corresponding room-temperature values.