Abstract:The effects of substrate temperature and O-2 flux on structural, electrical, and optical properties of the films prepared by RF reactive magnetron sputtering with SnF2-Sn target have been investigated by X-ray diffraction (XRD), Hall effect measurements, optical transmission spectra, and photoluminescence (PL) spectra. It is found that F-doped SnO films are produced and exhibit amorphous structure at lower O-2 fluxes for substrate temperature of RT-300 degrees C, and window of O2 flux for depositing the films is reduced as substrate temperature increases. F-doped SnO2 (FTO) films are formed at higher O-2 fluxes, and they exhibit amorphous state at substrate temperature of RT but crystalline state at substrate temperature of 150 and 300 degrees C. Furthermore, increasing O-2 flux or substrate temperature can promote crystallinity and affect growth orientation for crystalline FTO films. Highly conductive FTO films can be obtained only at suitable O-2 fluxes and higher substrate temperatures (150 and 300 degrees C), at which the films keep crystalline SnO2 structure along with high amount of oxygen vacancy (V-O). Increasing substrate temperature from 150 to 300 degrees C, the resistivity of FTO films cannot be further decreased due to the out-diffusion of F although the film crystallinity improves. Compared with F-doped SnO films, the average transmittance in visible light range and band gap (E-g) of FTO films obviously increase. The FTO films show similar shaped PL spectra that can be attributed to substitutional fluorine (F-O) and V-O defects in the films, and PL emission intensity increases with increasing O-2 flux or substrate temperature due to the improvement of film crystallinity. It is observed that the PL emission characteristics (shape and intensity) of F-doped SnO film are obviously different from FTO films and they have great changes as substrate temperature from RT to 150 degrees C, but corresponding mechanisms need to further clarify. (C) 2017 Elsevier B.V. All rights reserved.

Origin of Room Temperature Ferromagnetism in Sno2 Films

Origin Of Room Temperature Ferromagnetism In Mgo Films

Growth Temperature Dependent Evolutions of Microstructural, Optical and Magnetic Properties of Zn0.75Co0.25O Films

Search for Origin of Room Temperature Ferromagnetism Properties in Ni-Doped ZnO Nanostructure

Experimental and Theoretical Analyses of Zinc-Vacancy-Induced Room-Temperature Ferromagnetism in ZnO Films

Room Temperature Ferromagnetism of Amorphous MgO Films Prepared by Pulsed Laser Deposition

Room-temperature Ferromagnetism in Un-Doped ZrO2 Thin Films

Room Temperature Ferromagnetic Pure Zno

Intrinsic and Extrinsic Origins of Room Temperature Ferromagnetism in Ni-Doped Zno Films

Room Temperature Magnetic Properties of Zno Nanostructured Films

Search for Origin of Room Temperature Ferromagnetism Properties in Ni doped ZnO Nanostructure

The Ferromagnetism of Sn1−xFexO2 Films and Nanostructure Arrays Prepared by Magnetron Sputtering

Substrate Effect on the Room-Temperature Ferromagnetism in Un-Doped ZnO Films

Origin of Ferromagnetism in Zn-doped SnO2 from First-Principles Study

Room Temperature Ferromagnetism in ZnO Prepared by Microemulsion

Defects-Induced Room Temperature Ferromagnetism in ZnO Nanorods Grown from Ε-Zn(oh)2

Structural, Electrical, and Optical Properties of F-doped SnO or SnO2 Films Prepared by RF Reactive Magnetron Sputtering at Different Substrate Temperatures and O2 Fluxes

Room Temperature Ferromagnetism of Ni, (ni, Li), (ni, N)-doped ZnO Thin Films

Ferromagnetism Induced by Donor-Related Defects in Co-doped ZnO Thin Films

Oxygen vacancy-mediated room temperature ferromagnetism in Sr-doped SnO 2 nanoparticles

Thickness Dependence of Room Temperature Ferromagnetism Observed in Fe-doped NiO Thin Films