Simultaneous optimization of cooling temperature difference and efficiency for multi-stage thermoelectric device
Linghao Zhao,Duo Liu,Jianghe Feng,Erbiao Min,Juan Li,Yifeng Ling,Hao Li,Degang Zhao,Ruiheng Liu,Rong Sun
DOI: https://doi.org/10.1016/j.apenergy.2024.123878
IF: 11.2
2024-07-18
Applied Energy
Abstract:Cascaded multi-stage thermoelectric coolers (multi-TEC) have been proven to be an effective technology to achieve ultra-low temperature refrigeration. Although much theoretical research on multi-TEC has been carried out, how to fabricate a high-performance multi-TEC based on the reported thermoelectric materials is still not clear. In this work, we proposed a paradigm to design the geometry of a multi-TEC device to maximize the cooling efficiency (COP) and cooling temperature difference ( ΔT ) by aligning the current for the maximum COP of each stage. This design not only achieves the same ΔT compared with aligning the current for maximum Q c of each stage but also a great improvement of COP and power saving. The corresponding multi-TEC devices were also successfully fabricated, producing the high ΔT s of 108.6 K and 126.8 K for three- and four-stage devices, respectively, which deviate no more than 5% from the simulated results. Furthermore, the Bi 2 Te 3 -based five-stage device was predicted to achieve a ΔT max of 146.3 K at 300 K by this methodology, which can be further increased to 161.5 K by the utilization of heterogeneous low-temperature thermoelectric materials, breaking through the high-record cooling temperature of multi-TEC. Therefore, this paradigm can be widely applied in the practical design and fabrication of multi-TEC.
energy & fuels,engineering, chemical